Removing labels from plastic containers

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing labels from plastic containers

To remove labels from plastic containers, you can follow some simple steps:

• Fill the container with hot water and let it soak for a few minutes to soften the adhesive of the label.
• Use a scraper or a spatula to gently peel the label off the surface, being careful not to damage the container.
• If there are glue residues left, you can use coconut oil or olive oil to remove them.
• After completely removing the label and the glue, it is advisable to thoroughly wash the container with water and soap to eliminate any residues. By following these simple steps, you will be able to easily remove labels from plastic containers without damaging them.

How to Remove Stickers from Plastic Containers

To remove stickers from plastic containers, you can follow these steps:

• Fill a bucket with warm water and mild soap.
• Soak the container for 15-20 minutes to soften the adhesive.
• Gently rub the sticker with a sponge or soft cloth to remove it.
• If glue residues persist, use a solvent such as isopropyl alcohol or acetone to clean the area.
• Rinse the container with clean water and dry it with a cloth.
• Be careful not to use overly aggressive solvents that could damage the plastic.

Best techniques for removing labels from plastic containers

To remove labels from plastic containers, there are several effective methods:

• Start by gently heating the label with a hairdryer to soften the glue.
• Next, slowly peel off the label with your fingers, being careful not to tear it.
• If there is any glue residue left, use coconut oil or olive oil to dissolve it.
• Gently rub with a cloth soaked in isopropyl alcohol to remove any remaining residue.
• Finally, wash the container with water and soap to completely eliminate any traces of glue. By following these techniques, you can easily and effectively remove labels from plastic containers without damaging the underlying material.

DIY Solutions for Removing Stickers from Plastic Containers

To remove stickers from plastic containers in a DIY way, you can try different effective solutions:

• Soaking: immerse the container in hot water and soap to soften the adhesive.
• Vegetable oil: apply oil (such as olive oil) on the sticker and let it sit to dissolve the glue.
• White vinegar: dab the sticker with white vinegar to dissolve it.
• Oven: gently heat the container in the oven to facilitate the removal of the adhesive.
• Parchment paper: cover the sticker with parchment paper and use a hairdryer to heat it and peel it off. These DIY solutions are effective and safe for removing stickers from plastic containers.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85