Removing labels from plastic packaging

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing labels from plastic packaging

To effectively remove labels from plastic packaging, you can follow these steps:

1. Fill a container with warm water and add some mild detergent.
2. Soak the packaging in the warm water to soften the adhesive.
3. Use a spatula or sandpaper to gently peel off the label.
4. If there is any glue residue left, dab it with coconut oil or isopropyl alcohol to dissolve it.
5. Clean with a damp cloth to remove any traces of residual glue. By following these simple steps, you will be able to remove labels from plastic packaging without causing damage.

- Removing labels from plastic bottles

To remove labels from plastic bottles, you can follow these simple steps:

1. Fill a bucket with hot water and add dish soap.
2. Immerse the bottle in the water and let it soak for about 30 minutes.
3. Use a sponge or cloth to scrub off the label. If needed, add some baking soda to help remove glue residues.
4. If the label is stubborn, you can try using a hairdryer to heat it up and then gently peel it off.
5. Finally, rinse the bottle thoroughly to remove any glue or detergent residues. By following these steps, you can easily remove labels from plastic bottles effectively and without damaging the underlying material.

How to Remove Stickers from Plastic Containers

To remove stickers from plastic containers, you can follow these steps:

1. Fill a container with hot water and add some mild soap.
2. Immerse the container in the hot water and let it soak for a few minutes.
3. After the necessary time, use a spatula or sandpaper to gently peel off the sticker.
4. If the sticker is still difficult to remove, you can apply olive or coconut oil on the surface and let it sit for a few minutes. Then, rub with a cloth.
5. Finally, rinse the container with clean water and dry it carefully.

Removing stickers from plastic packaging

To remove stickers from plastic packaging, you can follow these steps:

1. Dampen a cloth with hot water and place it on the sticker for a few minutes to soften it.
2. Use a plastic scraper or a plastic card to gently peel off the sticker without damaging the packaging.
3. If there is any glue residue left, you can try removing it with coconut or olive oil, or with a mild detergent.
4. After removing the sticker, clean the surface thoroughly with water and soap to remove any remaining residue. By following these tips, you can effectively remove stickers from plastic packaging without damaging the underlying material.

Cleaning plastic containers from labels

To clean plastic containers from labels, you can follow a few simple steps:

1. Fill a container with warm water and mild soap.
2. Immerse the containers in the warm water to soften the labels.
3. Gently rub the labels with a sponge or a brush to remove them.
4. If needed, use a specific adhesive residue cleaner.
5. Rinse the containers thoroughly with clean water and let them dry completely. This method is effective for removing labels from plastic containers without damaging the material.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85