**Removing logistic labels without leaving streaks**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Removing logistic labels without leaving streaks**

To remove logistic labels without leaving streaks, it is advisable to use a specific adhesive solvent or a silicone-based product. Here are some steps to follow to achieve a clean result without any residue:

1. Dampen the label with the chosen solvent and let it sit for a few minutes to soften the adhesive.
2. Gently peel off the label using a spatula or a plastic scraper, avoiding scratching the underlying surface.
3. Repeat the process if necessary, adding more solvent if the adhesive proves stubborn.
4. Once the label is removed, clean the surface with a mild detergent to eliminate any glue residue. By following these simple steps, it will be possible to remove logistic labels without leaving unsightly streaks on the surface.

- Removing labels without residue 1

To remove labels without leaving any residue, it is advisable to use a gentle solvent such as isopropyl alcohol or acetone. Dampen a cloth with the chosen solvent and gently dab the label to soften it. Subsequently, carefully peel off the label, avoiding tearing, and remove any residue with another application of solvent. Alternatively, specific adhesive removal products can also be used. It is important to always test the solvent on a small hidden portion of the surface to check compatibility and prevent damage.

- Stain-Free Adhesive Removal 2

To remove adhesives without leaving stains, it is advisable to use a specific adhesive solvent or a vegetable oil such as coconut oil or olive oil. These products help dissolve the adhesive gently without damaging the surfaces. Here are some steps to follow to remove adhesives without leaving stains:

1. Apply the solvent or oil to the adhesive surface.
2. Let it sit for a few minutes to soften the adhesive.
3. Carefully use a spatula or cloth to remove the adhesive.
4. Repeat the process if necessary until the adhesive is completely removed.
5. Finally, clean the surface with water and soap to remove any solvent residues. By following these steps, you can effectively remove adhesives without leaving stains.

- Cleaning surfaces without traces 3

To clean surfaces without leaving any traces, it is advisable to use products based on silicone resins. Silicone resins are particularly suitable for cleaning glass, mirrors, shiny and delicate surfaces, as they ensure effective cleaning and a streak-free result. These products are ideal for those who want to achieve perfectly clean and transparent surfaces without the need for additional cleaning steps. Thanks to their properties, silicone resins guarantee thorough and professional cleaning, perfect for achieving impeccable results in DIY projects and home care.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85