Removing residues from liquid epoxy resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing residues from liquid epoxy resin

To remove residues from liquid epoxy resin, it is advisable to follow these steps:

1. Use a specific solvent for epoxies, such as acetone or isopropyl alcohol.
2. Apply the solvent to the affected area and let it sit for a few minutes to soften the resin.
3. Use a scraper or spatula to gently remove the softened residues.
4. If necessary, repeat the process until the residues are completely eliminated.
5. Finally, clean the area with water and soap to remove any residual traces of solvent. It is important to work in a well-ventilated area and wear appropriate personal protective equipment during this operation.

- Removing air bubbles from epoxy resin

To remove air bubbles from epoxy resin, it is essential to follow some precise steps:

1. Use a gas torch to gently heat the surface, allowing the bubbles to come to the surface.
2. Brush isopropyl alcohol over the still liquid resin to eliminate surface bubbles.
3. Use a vacuum degassing chamber to remove deeper bubbles.
4. Avoid overmixing the resin during preparation.
5. Allow the resin to rest for a few minutes before pouring. By carefully following these instructions, it will be possible to achieve a final result free of unsightly bubbles.

Removing Epoxy Resin Stains

To remove epoxy resin stains, you can follow these simple steps:

1. Gently scrape off the excess material with a spatula or sandpaper.
2. Apply acetone or denatured alcohol to the stain and let it sit for a few minutes.
3. Use a clean cloth soaked in solvent to gently dab the affected area.
4. Repeat the process until the stain is completely removed.
5. Finally, wash the area with water and soap to eliminate any solvent residues. It is important to work carefully and cautiously, avoiding damage to the surrounding surfaces.

Cleaning epoxy resin surface

To clean an epoxy resin surface, it is advisable to follow some specific steps:

1. Start by removing dust and dirt with a soft cloth or sponge.
2. Prepare a solution of warm water and mild detergent.
3. Apply the solution to the surface and gently scrub.
4. Rinse with clean water and dry with a dry cloth.
5. If there are stubborn stains, a specific epoxy resin cleaner can be used.
6. Avoid using abrasive products that could damage the coating. By following these guidelines, it will be possible to keep the epoxy resin surface clean and well-maintained.

Degreasing Epoxy Resin Objects

To degrease epoxy resin objects, it is advisable to use isopropyl alcohol or acetone. These solvents are effective in removing epoxy resin residues from surfaces and tools. It is important to work in a well-ventilated area and wear protective gloves during the operation. It is recommended to dampen a cloth with the chosen solvent and gently rub the object to remove dirt. Subsequently, it is important to thoroughly rinse the object with water and soap to eliminate any solvent residues. This procedure is useful for cleaning tools, surfaces, or artifacts made of epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85