Removing slow-evaporating glue

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing slow-evaporating glue

To remove slow-evaporating glue, it is advisable to follow these steps:

1. Use a specific solvent for glue removal, such as acetone or nitro thinner.
2. Apply the solvent to the affected surface and let it sit for a few minutes to soften the glue.
3. Use a scraper or a cloth to gently remove the softened glue from the surface.
4. If necessary, repeat the solvent application and removal process until all the glue has been removed.
5. Finally, thoroughly clean the surface with water and soap to remove any remaining glue and solvent residues. Always remember to follow the manufacturer's instructions for the solvent and work in a well-ventilated area to avoid exposure to fumes.

- Removing slow-evaporating glue

To remove slow-evaporating glue, you can follow some effective steps:

1. Use a specific solvent for glue removal, such as acetone or isopropyl alcohol.
2. Apply the solvent to the affected surface and let it sit for a few minutes to soften the glue.
3. Use a scraper or a microfiber cloth to gently remove the softened glue.
4. Repeat the process if necessary until the glue is completely removed.
5. Finally, thoroughly clean the surface with water and soap to eliminate any glue and solvent residues. By following these simple steps, it will be possible to effectively remove slow-evaporating glue safely and without damaging the underlying surface.

Removing glue residue from epoxy resin

To remove glue residue from epoxy resin, you can follow these steps:

1. First of all, it is advisable to gently scrape the surface with a non-abrasive tool to remove the bulk of the glue residue.
2. Next, you can apply isopropyl alcohol to the affected area and let it sit for a few minutes to soften the glue.
3. After allowing the alcohol to sit, you can use a soft cloth to gently rub and remove the glue residue from the resin.
4. Finally, it is important to rinse thoroughly with clean water and dry the surface well to prevent the formation of streaks. By following these simple steps, you will be able to effectively remove glue residue from epoxy resin.

How to Remove Glue from Silicone Molds

To remove glue from silicone molds, you can follow these steps:

1. Start by gently scraping off the excess glue with a spatula or plastic scraper.
2. Next, use a mild degreasing detergent to clean the glue residue. Make sure the detergent is compatible with silicone.
3. If the residue persists, you can try using vegetable oil or coconut oil to soften the glue. Let it sit for a few minutes and then clean carefully.
4. Finally, wash the silicone mold with warm water and mild soap to remove any remaining glue and oil residues. By following these tips, you can effectively remove glue from silicone molds without damaging them.

Cleaning slow-drying glue residue from epoxy resin

To clean slow-drying glue residue from epoxy resin, it is advisable to follow these steps:

1. Use a scraper or spatula to gently remove most of the hardened glue.
2. Soak a soft cloth in a specific resin solvent or acetone and gently dab the affected area.
3. Let the solvent sit for a few minutes to further soften the glue.
4. Repeat the process until the glue is completely removed.
5. Finally, thoroughly clean the area with water and soap to eliminate any solvent residue. Always remember to follow the manufacturer's instructions for the solvent and work in a well-ventilated area.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85