Removing stickers from hard plastic

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing stickers from hard plastic

To remove stickers from hard plastic, you can follow these steps:

1. Start by gently heating the sticker with a hairdryer to soften it.
2. Use a plastic spatula or a credit card to gently peel the sticker off the surface.
3. If there are glue residues left, try removing them with olive oil, coconut oil, or isopropyl alcohol.
4. Clean the plastic with soap and water to remove any traces of residue. Avoid using aggressive solvents that could damage the plastic. By following these tips, you can effectively remove stickers without harming the surface.

- Removing stickers from hard plastic

To remove stickers from hard plastic, you can follow these steps:

1. Start by gently heating the sticker with a hairdryer to soften it.
2. Use a plastic spatula or a rigid card to gently lift the sticker without scratching the surface.
3. If there is any adhesive residue left, you can use coconut oil or olive oil to dissolve it.
4. Dab the area with a cloth soaked in isopropyl alcohol to complete the cleaning process.
5. Finally, wash the plastic with water and soap to remove any oil residues. By following these steps, you can effectively remove stickers from hard plastic without damaging the surface.

Removing resin from plastic

To remove resin from plastic, you can follow these steps:

1. Prepare a solution of warm water and neutral soap.
2. Immerse the resin-coated object in the solution to soften it.
3. Gently scrub the resin with a soft brush to remove it.
4. If the resin is stubborn, try using isopropyl alcohol to dissolve it.
5. If necessary, you can resort to solvents such as acetone or paint thinner, being careful to test them first on a small hidden area to avoid damaging the plastic. By following these tips, you can effectively remove resin from plastic without causing any damage.

Removing glue from a hard surface

To remove glue from a hard surface, you can follow some effective steps:

• Use a hairdryer to heat the glue and make it softer, making it easier to remove with a scraper.
• Soak the surface in warm soapy water to soften the glue and rub with a cloth.
• Apply acetone or isopropyl alcohol on the glue to dissolve it and then clean with a cloth.
• Try a specific glue solvent, following the manufacturer's instructions for safe and effective use. Make sure to test the methods on a small hidden area to avoid damage to the surface.

Cleaning stickers on plastic material

To clean stickers on plastic material, it is advisable to follow these steps:

1. Moisten the sticker with hot water to soften it.
2. Use a mild detergent or isopropyl alcohol to remove the sticker.
3. Gently rub using a soft cloth or a plastic scraper.
4. If the sticker persists, you can try using coconut oil or olive oil to dissolve it.
5. After cleaning, thoroughly dry the surface with a clean cloth. By following these tips, it will be possible to remove stickers effectively without damaging the underlying plastic material.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85