Removing stickers from metal objects

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing stickers from metal objects

To remove stickers from metal objects, you can follow a few simple steps:

1. Start by heating the sticker with a hairdryer to soften it.
2. Use a plastic scraper or fine sandpaper to gently peel off the sticker.
3. Apply coconut or olive oil to the remaining adhesive residue and let it sit for a few minutes.
4. Clean with a microfiber cloth to remove the sticker and excess oil.
5. If necessary, repeat the process until the sticker is completely removed. Avoid using aggressive solvents that could damage the metal surface.

- Epoxy resin for metallic objects (1)

Epoxy resin for metallic objects is a versatile and durable coating, ideal for protecting and decorating metal surfaces. This type of resin offers a long-lasting and glossy finish, which protects against wear, corrosion, and weathering. Its formula adheres perfectly to the metal, ensuring a uniform coverage free of air bubbles. Prior to application, it is essential to carefully prepare the metal surface by removing grease, rust, and dirt. Once hardened, the epoxy resin creates a transparent and shiny protective layer, perfect for jewelry, decorative objects, and restoration work.

How to Remove Stickers from Metal Objects

To remove stickers from metal objects, you can follow these steps:

• Start by gently heating the sticker with a hairdryer to soften it.
• Use a plastic scraper or a credit card to gently peel off the sticker without damaging the metal surface.
• If there are any glue residues left, use a solvent such as isopropyl alcohol or acetone to thoroughly clean the area.
• After removing the sticker, wash the surface with water and soap to eliminate any solvent residues.
• Finally, dry the metal object thoroughly. By following these simple steps, you can easily remove stickers from metal objects without causing any damage.

Solutions for removing glue from metal surfaces

To remove glue from metal surfaces, there are several effective solutions available:

• Use acetone or specific glue solvents to soften and remove excess glue.
• Heat the surface with a hairdryer to melt the glue and then scrape it off with a spatula.
• Apply a chemical agent such as lemon oil or baking soda to dissolve the glue.
• Proceed with mechanical removal using an abrasive sponge or fine sandpaper.
• In extreme cases, a grinder or sander can be used for a more aggressive glue removal. It is important to always test the chosen solution on a small hidden area to avoid damage to the metal surface.

Best method to remove stickers from metal materials

To effectively remove stickers from metal materials, you can follow these steps:

1. Heat the sticker with a hairdryer to soften it.
2. Use a plastic spatula to gently peel off the sticker.
3. Apply isopropyl alcohol to dissolve any glue residues.
4. If residues persist, try with acetone (avoiding skin contact).
5. Clean the area with a degreasing detergent to completely remove the glue. By following these steps carefully, you will be able to remove stickers from metal materials without damaging them.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85