Removing stubborn labels in a few minutes

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing stubborn labels in a few minutes

To remove stubborn labels in a few minutes, you can follow these simple steps:

1. Fill a container with warm water and add some detergent.
2. Immerse the object with the label in the water for a few minutes.
3. Use a spatula or a scraper to gently peel off the label.
4. If there is any glue residue left, you can use a specific product for glue or adhesive removal.
5. Clean the object with a cloth to remove any remaining traces. By following these steps, you can effectively and quickly remove stubborn labels.

- Removing stubborn labels

To remove stubborn labels from surfaces, you can follow these steps:

• Start by gently heating the label with a hairdryer to soften the adhesive.
• Lift a corner of the label with a plastic spatula or label scraper.
• Apply olive oil, coconut oil, or acetone to the remaining adhesive and let it sit for a few minutes.
• Gently rub the adhesive with a microfiber cloth to remove it.
• If necessary, repeat the process until the adhesive is completely removed.
• Finally, wash the surface with water and soap to eliminate any oil or acetone residues. By following these steps, you can effectively remove stubborn labels without damaging the underlying surfaces.

How to Remove Adhesive Labels

To effectively remove adhesive labels, you can follow a few simple steps:

1. Dampen the label with hot water or a gentle detergent to soften it.
2. Use a plastic scraper or spatula to gently lift a corner of the label.
3. Slowly pull the label with decisive movements, being careful not to tear it.
4. If adhesive residue remains, massage with olive oil or acetone to dissolve it.
5. Clean the area with water and soap to remove any traces of glue. By following these steps, you can remove adhesive labels without damaging the underlying surface.

Removing glue from surfaces

To remove glue from surfaces, you can follow some effective methods:

• Use acetone or isopropyl alcohol to dissolve the glue.
• Apply vegetable oil or peanut butter to soften the glue and gently remove it.
• Try scraping with a plastic spatula or a glass scraper to remove hardened glue.
• Alternatively, you can use a hairdryer to heat the glue and make it easier to remove. It is important to test these methods on a small hidden area of the surface to avoid damage.

Cleaning adhesive residues

To effectively clean adhesive residues, you can follow some simple steps:

1. Use a specific solvent for the adhesive in question, such as isopropyl alcohol or acetone.
2. Apply the solvent on a clean cloth and gently dab the affected area to soften the adhesive.
3. Once softened, rub gently to remove the adhesive residues.
4. If necessary, repeat the process until the adhesive is completely removed.
5. Finally, clean the area with water and soap to eliminate any traces of residual solvent. By following these steps, you can effectively clean adhesive residues without damaging the underlying surfaces.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85