Removing tough glue residues

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing tough glue residues

To remove tough glue residues, you can follow these steps:

1. Soaking: Soak the affected area in warm water and soap to soften the glue.
2. Scraping: Use a spatula or sandpaper to gently scrape off the residues.
3. Acetone: Apply acetone on a clean cloth and gently rub it on the glue to dissolve it.
4. Oil: Coconut or olive oil can help dissolve any remaining glue residues.
5. Final cleaning: After removing the glue, clean the area with water and soap to eliminate any remaining residues. By following these steps, you should be able to effectively remove tough glue residues.

- Removing glue residues from epoxy resin

To remove glue residues from epoxy resin, it is advisable to follow these steps:

1. Use a specific solvent for resin, such as acetone or isopropyl alcohol, on a clean cloth.
2. Gently dab the affected area to soften the residual glue.
3. Carefully scrape using a plastic scraper to avoid damaging the resin surface.
4. Repeat the process until all glue residues are completely removed.
5. Wash the treated area with water and mild soap to eliminate any solvent traces. It is important to test the solvent on a small, inconspicuous area of the resin to check compatibility and prevent damage.

Removing glue residues from epoxy resin

To remove glue residues from epoxy resin, it is advisable to follow these steps:

1. Soften the glue: Use heat with a hairdryer to soften the glue and facilitate its removal.
2. Scrape gently: With the help of a spatula or a plastic scraper, gently remove the glue residues without damaging the epoxy resin.
3. Clean with isopropyl alcohol: Apply isopropyl alcohol on a clean cloth and gently rub to eliminate any remaining traces of glue.
4. Polish the surface: Finally, polish the epoxy resin with a soft cloth to restore its original shine.

Cleaning adhesive residues from silicone molds

To clean adhesive residues from silicone molds, it is advisable to follow these steps:

1. Use a gentle solvent such as isopropyl alcohol or acetone to dissolve the adhesive without damaging the silicone.
2. Apply the solvent to the affected area and let it sit for a few minutes.
3. Use a soft cloth or sponge to gently rub and remove the adhesive residues.
4. Repeat the process if necessary until completely clean.
5. Finally, wash the mold with water and mild soap to remove any solvent residues. By carefully following these instructions, it will be possible to effectively clean adhesive residues from silicone molds.

How to Remove Glue Residue on Resin Pigments

To remove glue residue on resin pigments, follow these steps:

1. Use a gentle solvent such as isopropyl alcohol or acetone to dissolve the glue without damaging the pigments.
2. Apply the solvent on a clean cloth and gently dab the affected area, avoiding rubbing to prevent further spreading of the glue.
3. Let the solvent sit for a few minutes to fully dissolve the glue.
4. Clean the area with another clean cloth to remove any glue and solvent residue.
5. Finally, wash with water and soap to ensure complete removal of the glue traces. By following these simple steps, you can effectively eliminate glue traces from resin pigments.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85