Removing tough industrial adhesives

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Removing tough industrial adhesives

To remove tough industrial adhesives, you can follow some effective steps:

• Use a hairdryer to heat the adhesive and make it easier to peel off.
• Apply a specific solvent for the adhesive, such as acetone or isopropyl alcohol, using a clean cloth.
• If the adhesive is on a water-resistant surface, you can try using hot water and soap.
• Alternatively, there are specific products available for adhesive removal, such as dedicated solvents or cooling sprays.
• After removing the adhesive, thoroughly clean the surface with a degreasing detergent. By following these methods, it will be possible to effectively remove tough industrial adhesives without damaging the surfaces.

- Removal of Strong Adhesives (1)

Removing strong adhesives can be a challenge, but there are several effective methods to use. Here are some helpful tips:

• Start by heating the adhesive with a hairdryer to soften it.
• Use a plastic scraper or sandpaper to gently peel off the adhesive without damaging the underlying surface.
• Try using specific solvents such as isopropyl alcohol or acetone to dissolve the adhesive more effectively.
• After removing the adhesive, clean the area thoroughly with water and soap to eliminate any residue. By following these steps, you can effectively remove strong adhesives without damaging the surfaces.

- Removing Stubborn Glue (2)

To remove stubborn glue, you can follow these steps:

• Start by scraping off as much of the glue as possible with a scraper or spatula.
• Apply a specific solvent agent for glue removal, such as acetone or a resin-based solvent.
• Let the solvent act for a few minutes to further soften the glue.
• After letting the solvent sit, clean the area with a clean cloth.
• Repeat the process if necessary until the glue is completely removed. By following these steps carefully, it is possible to effectively eliminate stubborn glue from various surfaces.

- Degreasing adhesive surfaces (3)

Degreasing adhesive surfaces is essential to use specific products that ensure effective cleaning without damaging the adhesion. Here are some steps to follow:

1. Choose a gentle detergent: opt for a specific detergent for degreasing adhesive surfaces, avoiding aggressive solvents that could compromise the material.
2. Apply the detergent: distribute the detergent on the adhesive surface and let it act for the recommended time on the package.
3. Clean carefully: use a soft cloth or sponge to remove excess dirt, being careful not to damage the adhesive. By following these simple steps, it will be possible to effectively degrease adhesive surfaces without compromising their adhesion.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85