**Safe and Quick Adhesive Removal**

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

**Safe and Quick Adhesive Removal**

To safely and quickly remove adhesives, you can follow these simple steps:

1. Moisten the adhesive with hot water or a gentle detergent to soften it.
2. Use a spatula or a plastic card to gently peel off the adhesive without damaging the underlying surface.
3. If necessary, apply a specific solvent such as isopropyl alcohol or acetone to completely dissolve the adhesive.
4. Thoroughly clean the treated area to remove any glue residues.
5. Finally, dry the surface well to prevent the formation of stains. By following these steps, it will be possible to effectively remove adhesives without damaging the underlying support.

- Removing stickers from epoxy resin

To remove stickers from epoxy resin, you can follow a few simple steps. Initially, it is advisable to gently heat the sticker with a hairdryer to make it softer and easier to peel off. Subsequently, with the help of a plastic spatula, you can gently scrape the sticker off the surface of the resin. Alternatively, you can use a gentle solvent such as isopropyl alcohol to dissolve any excess adhesive. It is important to be careful not to damage the resin during the sticker removal process.

How to Remove Stickers from Epoxy Resin

To remove stickers from epoxy resin, you can follow these steps:

1. Use a hairdryer to gently heat the sticker without overheating the resin.
2. Gently rub the sticker with a cloth soaked in isopropyl alcohol to dissolve the adhesive.
3. If the sticker is stubborn, you can try scraping it off with a plastic spatula, being careful not to damage the resin.
4. Alternatively, you can use a specific adhesive solvent for resin, following the manufacturer's instructions carefully. It is important to proceed with caution to avoid damaging the resin surface during sticker removal.

Safe method to remove adhesives

To safely and effectively remove adhesives, it is advisable to follow the following steps:

1. Soaking: Use hot water and mild soap to soften the adhesive.
2. Vegetable oil: Apply vegetable oil on the adhesive and let it sit for a few minutes to dissolve it.
3. Isopropyl alcohol: Clean the adhesive with isopropyl alcohol to completely remove it.
4. Steam accordion: Use a steam accordion to gently heat and remove the adhesive.
5. Plastic scraper: Use a plastic scraper to gently peel off the adhesive without damaging the surfaces. By following these methods, it is possible to safely remove adhesives without damaging the underlying surfaces.

Fast removal of adhesives from delicate surfaces

For the fast removal of adhesives from delicate surfaces, it is advisable to use a gentle method to avoid damage. Here are some steps to follow:

• Moisten the adhesive with hot water or a mild detergent.
• Use a plastic spatula or scraper to slowly peel off the adhesive.
• If the adhesive is stubborn, you can try heating it with a hairdryer to make it easier to remove.
• After removing the adhesive, clean the surface with a non-aggressive detergent to eliminate any residues. By following these instructions, it will be possible to remove adhesives quickly and safely from delicate surfaces without causing any damage.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85