Specific mold release agent for epoxy resins

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Specific mold release agent for epoxy resins

A specific mold release agent for epoxy resins is a product formulated to facilitate the removal of epoxy resin pieces from molds. This type of release agent creates a separating layer between the resin and the mold, allowing for easier release and reducing the risk of damaging the piece during extraction. Typically, mold release agents for epoxy resins are designed to ensure a clean surface free of residues, essential for achieving high-quality finishes. Prior to application, it is advisable to test the release agent on a sample to verify its compatibility with the type of resin used.

Epoxy resin mold release

The epoxy resin mold release is a product used in the resin industry to facilitate the removal of surfaces from molds and silicone molds. It is a solution that, once applied to the surface of the support, creates a separating layer that prevents the epoxy from adhering completely. In this way, once the resin has hardened, it can be easily removed without damaging the underlying support. The epoxy resin mold release is particularly useful in the DIY and creative hobby sector, where resin processing is widespread.

How to use epoxy resin mold release

To correctly use a mold release for epoxy resin, follow these steps:

1. Make sure you have a specific mold release for epoxy resins.
2. Apply the mold release evenly on the clean and dry mold using a brush or spray.
3. Allow the mold release to dry according to the manufacturer's instructions.
4. Pour the epoxy resin into the prepared mold.
5. Once the resin has fully cured, carefully remove it from the mold.
6. If necessary, clean any mold release residue with water and soap. By carefully following these instructions, you can easily create epoxy resin shapes without any adhesion issues to the mold.

Epoxy resin mold release agent for DIY projects

The epoxy resin mold release agent for DIY projects is a product used to facilitate the removal of epoxy resin from molds and work surfaces. It is a solution that, once applied to the surface, prevents the resin from adhering permanently, simplifying the extraction process and reducing the risk of damaging the finished product. This type of release agent is particularly useful for those involved in epoxy resin processing projects at an amateur or professional level, allowing for greater ease in using epoxy resin and ensuring optimal results.

Epoxy and Silicone Mold Release Agent

The epoxy and silicone mold release agent is a crucial product to facilitate the removal of artifacts from mold surfaces. This agent creates a protective layer between the material and the support, preventing adhesion and greatly simplifying the extraction process. It is particularly useful in molding, casting, or laminating applications, where epoxy and silicone can firmly adhere to the working surface. Using a specific release agent for the type of material ensures optimal results and preserves the quality of the finished artifact.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85