Correct use of epoxy thinner

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Correct use of epoxy thinner

Epoxy thinner is a solvent used to dilute epoxy resins in order to achieve the desired consistency for application. It is essential to correctly follow the manufacturer's instructions to ensure safe and effective use. To properly use epoxy thinner, follow these steps:

1. Make sure to work in a well-ventilated area and use personal protective equipment.
2. Shake the thinner well before use.
3. Add the thinner to the epoxy following the recommended proportions.
4. Mix thoroughly to ensure a uniform blend.
5. Apply the resulting compound within the specified working time. Following these guidelines is essential to achieve optimal results and ensure safety during the application of epoxy resins.

How to Dilute Epoxy Resin

To dilute epoxy resin, it is recommended to carefully follow the manufacturer's instructions to ensure an optimal result. In general, epoxy resin can be diluted with a specific solvent recommended by the manufacturer itself, such as isopropyl alcohol or acetone. It is advisable to gradually add the solvent to the epoxy resin, mixing thoroughly, until the desired consistency is achieved. It is important to pay attention to the recommended dilution ratios to avoid alterations to the characteristics of the resin and the final coating. It is also recommended to perform a test on a small area to verify the result before proceeding with the application on a larger surface.

**Instructions for Diluting Epoxy Resin**

To dilute epoxy resin, it is necessary to carefully follow the following instructions:

1. Make sure to use a specific diluent for epoxy resins, such as acetone or denatured alcohol.
2. Pour the desired amount of resin into a clean container and gradually add the diluent, stirring carefully with a stick to avoid the formation of air bubbles.
3. Keep adding the diluent until you reach the desired consistency. Remember that an excessive amount of diluent can compromise the properties of the resin.
4. Once you have achieved the desired consistency, use the diluted resin within the working time specified by the manufacturer.
5. Always follow the manufacturer's instructions on dilution and the use of epoxy resin to ensure optimal results. Remember to visit resin-pro.co.uk for all your epoxy resin needs.

Tips for using epoxy thinner

To properly use epoxy thinner, follow these practical tips:

1. Make sure to use the specific thinner recommended for the epoxy you are using.
2. Mix the epoxy thinner with the epoxy resin carefully following the proportions recommended by the manufacturer.
3. Use the thinner to adjust the viscosity of the epoxy mixture, to facilitate application, or to eliminate any air bubbles.
4. Work in a well-ventilated area and use personal protective equipment such as masks and gloves.
5. Always follow the manufacturer's instructions to ensure a safe and effective use of the epoxy thinner. For more information on epoxy products, visit the RESINPRO website at resin-pro.co.uk.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85