Epoxy resin crystal effect thinner usage

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy resin crystal effect thinner usage

The epoxy resin crystal effect thinner is a product used to achieve greater transparency and brilliance in epoxy resins, giving them a glass-like or crystal appearance. This type of thinner is usually employed to create transparent coatings on surfaces such as tables, countertops, or artisanal objects. To use it correctly, it is advisable to mix it with the epoxy resin following the doses and methods indicated by the manufacturer. It is important to pay attention to the proportions and carefully follow the instructions to avoid any potential catalysis or final coating appearance issues.

Epoxy Resin Thinner

Epoxy resin thinner is a product used to reduce the viscosity of epoxy resins, facilitating mixing and application. It is an essential component to achieve the desired consistency and improve the workability of the resin. It is important to carefully follow the manufacturer's instructions on the quantity and type of thinner to use, as these may vary depending on the resin and the ongoing project. Proper use of the thinner helps achieve optimal results in the preparation and application of epoxy resins, ensuring superior performance and durability of the final coating.

How to thin epoxy resin

To thin epoxy resin, it is advisable to carefully follow the manufacturer's instructions to ensure optimal results. Here is a general procedure for thinning epoxy resin:

1. Make sure to use a solvent recommended by the manufacturer to avoid unwanted reactions.
2. Pour the desired amount of epoxy resin into a clean container and add the solvent gradually.
3. Mix thoroughly with a stick to prevent the formation of air bubbles.
4. Continue adding the solvent until the desired consistency is reached, being careful not to over-thin the resin.
5. Use the thinned resin within the working time indicated by the manufacturer. Always remember to wear protective clothing and work in a well-ventilated area when handling epoxy resin.

Transparent epoxy resin thinner

The transparent epoxy resin thinner is a product used to reduce the viscosity of epoxy resins, making it easier to apply and ensuring greater transparency of the final product. This type of thinner is particularly useful in applications where a higher fluidity of the resin is required, such as in the sector of epoxy coatings for transparent surfaces. It is important to carefully follow the manufacturer's instructions to ensure the correct use of the thinner and achieve optimal results. Before using any type of thinner, it is advisable to carry out preliminary tests to evaluate its effectiveness and compatibility with the epoxy resin in use.

Diluting crystal effect epoxy resin

To achieve a crystal effect with epoxy resin, it is possible to dilute it with a specific solvent such as isopropyl alcohol. This process helps to reduce the viscosity of the resin, allowing you to create a thinner and more transparent layer, similar to a crystal effect. It is important to carefully follow the manufacturer's instructions for both the epoxy resin and the solvent, to ensure proper mixing and application. Make sure to work in a well-ventilated environment and use the appropriate personal protective equipment when handling the diluted resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85