Water-based epoxy resin thinner reviews

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Water-based epoxy resin thinner reviews

The water-based epoxy resin thinner is widely appreciated for its effectiveness in reducing the viscosity of the resin, thus facilitating its workability and improving the final appearance of the coating. Users' opinions on this product are generally positive, as it allows for greater adhesion and a more uniform and transparent finish. Additionally, the water-based thinner is valued for its lower toxicity compared to solvent-based alternatives, making it a safer and more sustainable choice for DIY and professional projects.

Comparison of epoxy resin thinners

Epoxy resin thinners are used to adjust the viscosity of the material and facilitate its application. Compared to water-based epoxy resin thinners, solvent-based ones offer greater chemical resistance and better adhesion. However, water-based thinners are less toxic and safer for the environment. When comparing the two types of epoxy resin thinners, it is important to consider the specific project requirements, the working environment, and the current safety and environmental regulations. It is advisable to consult the epoxy resin supplier to determine the most suitable thinner for your needs.

How to Properly Dilute Epoxy Resin

To properly dilute epoxy resin, it is essential to carefully follow the manufacturer's instructions to achieve optimal results. Here are the steps to follow:

1. Make sure to use a thinner recommended by the manufacturer or specifically designed for epoxy resins.
2. Measure accurately the amount of epoxy resin and thinner needed, respecting the recommended proportions.
3. Slowly mix the resin and the thinner in a clean, moisture-free container to avoid air bubbles.
4. Mix thoroughly until a homogeneous and transparent compound is obtained.
5. Use the diluted resin within the recommended time to avoid premature hardening.
6. Apply the diluted resin following the project's instructions. By following these guidelines, you will be able to properly dilute epoxy resin for your DIY project.

Ecological alternatives for diluting epoxy resin

Ecological alternatives for diluting epoxy resin include citrus-based solvents, such as d-limonene, and alcohol-based solvents, such as ethyl alcohol or isopropyl alcohol. These solvents are considered more environmentally friendly than traditional petroleum-based solvents as they are biodegradable and less harmful to the environment. Moreover, using ecological solvents helps reduce environmental impact and create a safer working environment. Before using any solvent to dilute epoxy resin, it is advisable to test its compatibility and carefully follow the manufacturer's instructions.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85