Transparent coating for bathrooms

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Transparent coating for bathrooms

A transparent coating for bathrooms is a product that provides protection and resistance to surfaces, such as tiles, bathtubs, and sinks. This type of coating is made with special resins or silicones that create a transparent barrier against humidity, mold, and chemical agents. Applying a transparent coating for bathrooms is an excellent solution to preserve the beauty and durability of surfaces, making them easier to clean and maintain over time. Moreover, this treatment is ideal to ensure greater hygiene and protection against stains and typical atmospheric agents in a moist environment like the bathroom.

Epoxy paint for bathroom floors

Epoxy paints for bathroom floors are a resistant and durable solution to protect and decorate surfaces. These paints are based on epoxy resins that ensure a robust and waterproof finish, ideal for environments subject to humidity and constant wear like the bathroom. Applying an epoxy paint for bathroom floors offers numerous advantages, including resistance to scratches, chemicals, and stains. Moreover, the surface will be easier to clean and maintain over time. Before applying the epoxy paint, make sure to properly prepare the floor to ensure optimal adhesion and a long-lasting result.

**Tutorial: How to Create a Resin Shower Tray**

Creating a resin shower tray is a process that requires precision and attention to detail. Here are the fundamental steps to make a resin shower tray:

1. Surface Preparation: Ensure that the surface is clean, dry, and free from dust and grease.
2. Primer Application: Apply a specific resin primer layer to the entire surface.
3. Resin Mixing: Prepare the resin carefully following the manufacturer's instructions and mix thoroughly.
4. Resin Application: Pour the resin onto the prepared surface and level it with a notched trowel.
5. Drying: Allow the resin to dry for the time indicated by the manufacturer.
6. Finishing: Once dry, sand the surface with fine sandpaper and apply a protective coating. By following these steps, you will be able to create a durable and high-quality resin shower tray. For more information, visit resin-pro.co.uk.

How to protect bathroom mosaic with resin

To protect a mosaic in the bathroom with resin, it is important to carefully follow these steps:

1. Cleaning: Ensure that the surface of the mosaic is clean, dry, and free from dust or residues.
2. Resin preparation: Prepare the epoxy or polyurethane resin following the manufacturer's instructions.
3. Application: Spread the resin evenly on the mosaic with a brush or roller, making sure to cover the surface completely.
4. Drying: Let the resin dry for the specified time indicated in the instructions, avoiding moisture during this process.
5. Finishing: If necessary, apply an additional layer of resin for enhanced protection and durability over time. Remember to carefully follow the manufacturer's resin instructions to ensure an optimal and long-lasting result.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85