Ceramic Effect Bathtub Enamel

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Ceramic Effect Bathtub Enamel

The ceramic effect bathtub enamel is a durable and resistant coating, ideal for giving new life to cast iron or steel bathtubs. This type of enamel is formulated with epoxy or polyurethane resins, which give the surface a ceramic-like appearance. Thanks to its high adhesion and resistance to chemical agents and wear, the ceramic effect bathtub enamel ensures effective protection against scratches, stains, and temperature changes. Available in different shades, it can be easily applied even in a DIY context, by carefully following the manufacturer's instructions to achieve optimal results.

DIY bathtub enamel

DIY bathtub enamel is a cost-effective solution to revitalize bathtubs without the need for expensive professional interventions. This type of enamel is designed to withstand water and wear, ensuring a durable and long-lasting finish. Before application, it is essential to thoroughly clean the surface of the tub and remove any soap scum or limescale residues. It is also advisable to lightly sand the surface to ensure better adhesion of the enamel. Follow the manufacturer's instructions carefully for correct application and to achieve satisfactory results.

**Bathtub Enamel Tutorial**

Applying enamel to a bathtub is a process that requires precision and attention to detail. Here is a step-by-step guide for optimal results:

1. Preparation: Thoroughly clean the bathtub from any soap scum or limescale residues.
2. Sanding: Use fine-grit sandpaper to sand the surface and ensure the enamel adheres properly.
3. Primer: Apply a specific primer for bathtubs and let it dry completely.
4. Enamel: Apply the bathtub enamel evenly with a specific brush, following the manufacturer's instructions.
5. Drying: Respect the indicated drying times and avoid using the bathtub for at least 24 hours.
6. Maintenance: To ensure the longevity of the treatment, avoid using abrasive products on the bathtub. By carefully following these steps, you can give your bathtub a new lease of life with a durable and quality enamel.

Durable bathtub enamel

Durable bathtub enamel is an effective solution to protect and coat bathtubs in a durable and wear-resistant manner. This type of enamel, often based on high-quality resins and silicones, offers a water-resistant, chemical-resistant, and abrasion-resistant finish. By correctly applying durable bathtub enamel, you can ensure greater durability and easy surface cleaning. Prior to application, it is essential to adequately prepare the surface by removing old coatings and ensuring it is clean and dry. Additionally, carefully follow the manufacturer's instructions to achieve the best possible results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85