Water-based enamel for bathrooms

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Water-based enamel for bathrooms

Water-based enamel for bathrooms is a type of coating resistant to water and humidity, ideal for protecting and decorating surfaces such as tiles, bathtubs, and sinks. This type of enamel is formulated to withstand the typical conditions of the bathroom environment, avoiding deterioration caused by water and chemical products. Thanks to its water-based composition, it is less toxic and less harmful to the environment compared to traditional solvent-based enamels. Applying water-based enamel for bathrooms is an excellent solution for renovating and protecting surfaces, ensuring durability and resistance over time.

Epoxy enamel for bathrooms

Epoxy enamel for bathrooms is a durable and waterproof coating ideal for protecting surfaces such as bathtubs, tiles, and sinks. This type of enamel is formulated with epoxy resins that ensure a long-lasting and high-quality finish. By applying epoxy enamel to bathroom surfaces, it is possible to achieve effective protection against moisture, scratches, and stains. Furthermore, its chemical resistance makes it perfect for environments exposed to detergents and cleaning products. Before applying epoxy enamel, it is important to carefully prepare the surface to ensure optimal adhesion and long-lasting results over time.

How to Apply Enamel on Bathroom Tiles

To apply enamel on bathroom tiles, it is important to carefully follow these steps:

1. Cleaning: Make sure the tiles are clean and free from dirt, grease, or soap residue. Use a degreasing detergent and rinse well.
2. Sanding: If the tiles have irregularities, sand them with fine sandpaper to promote the adhesion of the enamel.
3. Primer: Apply a specific primer for tiles to improve the enamel adhesion.
4. Application: Spread the enamel evenly with a brush or roller to avoid bulges or drips.
5. Drying: Allow the enamel to dry completely following the manufacturer's instructions.
6. Sealing: Once dry, seal the enamel with a clear sealant to protect it from wear and moisture. By following these steps, you can achieve a long-lasting and quality result.

Bathroom enamel resistance

The resistance of enamel for the bathroom is essential to ensure the durability and aesthetic appearance of coated surfaces. Bathroom coatings, such as enamels and epoxy resins, are designed to withstand moisture, chemical agents, and daily wear. To improve the resistance of bathroom enamel, it is advisable to follow some maintenance practices, such as avoiding the use of aggressive cleaning products and not using sharp objects that could scratch the surface. Additionally, applying a protective layer or a sealing varnish can help extend the durability and resistance of the enamel over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85