Yellowed bathtub treatment

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Yellowed bathtub treatment

The treatment for a yellowed bathtub can be carried out using specific products for restoring the color and brightness of the surface. Here are some steps to follow for this process:

1. Thoroughly clean the bathtub with a degreasing detergent to remove dirt and accumulated residues.
2. Gently sand the surface to remove the damaged top layer and promote the adhesion of the new coating.
3. Apply a resin primer to the entire bathtub to prepare the surface for the subsequent treatment.
4. Apply a resin or silicone-based coating specifically designed for bathtubs, which not only restores the original color but also protects the surface from weathering and wear over time. By carefully following these steps, it is possible to breathe new life into a yellowed bathtub and achieve long-lasting and aesthetically pleasing results.

How to whiten a resin bathtub

To whiten a resin bathtub, you can follow these steps:

1. Prepare a solution of hot water and bleach, diluting the bleach according to the manufacturer's instructions.
2. Apply the solution to the surface of the resin bathtub with a cloth or sponge.
3. Let it sit for about 15-20 minutes to allow the bleach to act on dirt and stains.
4. Rinse thoroughly with clean water to completely remove the product.
5. Dry with a dry cloth. It is important to carefully follow the manufacturer's instructions for the resin bathtub and perform a test on a small, inconspicuous area before proceeding with the full treatment.

Products to restore a dulled bathtub

To restore a dulled bathtub, specific products formulated to bring back the shine and brightness of the surface can be used. Among the most common solutions are:

• Bathtub polishing kits: they contain specific polishes and tools to remove scratches and dullness.
• Transparent polyurethane resins: ideal for coating the surface and restoring shine.
• Silicone-based products: help protect the bathtub and maintain its shine over time.
• Transparent acrylic coatings: can be applied to create a protective and glossy layer on the dulled surface. Before using any product, it is advisable to carefully follow the manufacturer's instructions and perform tests on a small, inconspicuous area to check compatibility with the bathtub material.

Solutions for regenerating a disused bathtub

Regenerating a disused bathtub can be achieved through various solutions, depending on the current condition of the tub and the user's needs. Here are some common options:

• Disposal and replacement with a new bathtub
• Regeneration by repairing any cracks or superficial damage
• Application of a resin or silicone coating to give the tub a new and durable appearance
• Transformation of the tub into a shower, using specific conversion kits
• Use of DIY regeneration kits, available on the market Before proceeding with any solution, it is advisable to assess the condition of the tub and consult with a professional to identify the best option.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85