Insulating Tape for Cable Protection

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Insulating Tape for Cable Protection

Insulating tape for cable protection is an essential component to ensure the safety and reliability of electrical systems. Made of vinyl resin or silicone, this tape is designed to insulate and protect electrical cables from moisture, dust, and weather agents. Thanks to its high electrical resistance and ability to adhere securely to the cables, insulating tape prevents short circuits and damage to the conductors. It is a useful solution in the DIY and electronics sector, where cable protection is crucial to ensure the proper functioning of systems.

Water-resistant electrical insulation tape

The water-resistant electrical insulation tape is designed to provide reliable protection against moisture and atmospheric agents. Made with waterproof epoxy resins and silicones, this type of tape is ideal for applications in humid or outdoor environments. Thanks to its water resistance, it prevents short circuits and damage to electrical connections even in high humidity conditions. It is particularly useful in the DIY sector for insulating and protecting electrical cables outdoors or in humid environments, ensuring safety and durability over time. Opting for water-resistant electrical insulation tape is a wise choice to preserve the integrity of electrical circuits in adverse conditions.

**Guide to Electrical Cable Installation**

The installation of electrical cables is a fundamental operation to ensure the proper functioning of the electrical system. Here is a practical guide to carry out this activity safely and effectively:

1. Planning: Evaluate the route of the cables, considering the necessary length and the location of the electrical outlets.
2. Cable Selection: Make sure to use electrical cables that comply with current regulations and are suitable for the required power.
3. Preparation: Turn off the electrical system, check for the absence of current, and prepare the necessary tools such as wire strippers and a drill.
4. Installation: Pass the cables through protected conduits, avoiding excessive bends that could damage them.
5. Connection: Connect the cables to the electrical outlets respecting the correct polarity and ensuring they are securely fastened.
6. Testing: After the installation, verify the proper functioning of the electrical system. By carefully following these steps, you can install electrical cables safely and efficiently.

Materials to protect electrical cables

Protecting electrical cables is essential to ensure their durability and safety. There are several options for materials suitable for this purpose:

• Heat-shrink sleeves: protect cables from external agents such as moisture, dust, and corrosion.
• PVC corrugated tubes: provide mechanical protection against impacts and crushes.
• Epoxy resins: ideal for sealing and insulating cables from moisture and chemical agents.
• Liquid silicone: protects cables from weathering and temperature fluctuations.
• Polyethylene coatings: ensure insulation and protection against abrasion. Choosing the most suitable material depends on specific needs and the environment in which the electrical cables will be used.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85