Motor insulation tape

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Motor insulation tape

Motor insulation tape is an essential component for protecting electric motors from short circuits and electrical damage. Made with special high-temperature resistant resins, this tape offers excellent protection against moisture, chemicals, and abrasion. Its silicone composition allows for perfect adhesion to surfaces, ensuring reliable and effective insulation. Ideal for industrial and DIY applications, motor insulation tape is easy to apply and ensures long-lasting protection, keeping motors safe from electrical failures.

Epoxy resin for motor insulation

Epoxy resin is widely used for motor insulation, ensuring electrical protection and resistance to high temperatures. This versatile material is appreciated for its ability to form a compact and durable coating, capable of protecting internal components from moisture, dust, and harmful external agents. The application of epoxy resin requires attention to detail and correct procedures to ensure effective and long-lasting insulation. Before proceeding with the application, it is important to properly prepare the surface and follow the manufacturer's instructions to achieve the best possible results.

How to insulate engines with epoxy resin

To insulate engines with epoxy resin, it is necessary to carefully follow a few steps. First of all, make sure that the engine is clean and dry to ensure optimal adhesion of the resin. Next, protect the parts that should not be coated with adhesive tape or specific materials. Thoroughly mix the epoxy resin with the hardener according to the manufacturer's instructions and pour the mixture onto the engine evenly. Allow it to dry completely following the recommended curing times. Finally, make sure that the coating is well cured before operating the engine. This process ensures excellent protection and insulation of the engine.

**Tutorial: Motor Insulation with Epoxy Resin**

Insulating motors with epoxy resin is a fundamental process to ensure electrical and mechanical protection. Here's how to proceed:

1. Preparation: Thoroughly clean and dry the motor to remove dirt and grease.
2. Masking: Protect parts not to be coated with adhesive tape and paper.
3. Resin Mixing: Follow the manufacturer's instructions to properly mix the epoxy resin.
4. Application: Pour the resin onto the motor surface evenly. Ensure no air bubbles are trapped.
5. Curing: Allow the resin to dry for the specified time as per the manufacturer's instructions. By following these steps, you can effectively insulate the motor with epoxy resin for long-lasting protection.

Epoxy resin for protecting engines

Epoxy resin is an excellent choice for protecting engines from weathering and corrosion. Its ability to adhere firmly to metal surfaces and withstand high temperatures makes it ideal for this purpose. By applying a thin layer of epoxy resin to the engine, a protective barrier is created to prevent damage from moisture, dust, and chemicals. Additionally, epoxy resin helps reduce friction and wear on the internal parts of the engine, extending its lifespan. Before applying the resin, make sure to thoroughly clean the surface and follow the manufacturer's instructions to ensure effective and long-lasting protection.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85