Radiator Hose Repair Tape

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Radiator Hose Repair Tape

Radiator hose repair tape is a practical and effective solution for temporarily fixing small water leaks in the car's cooling system. Made of materials suitable for thermal resistance and water pressure, this self-adhesive tape is designed to temporarily seal cracks or holes in the radiator hose, allowing you to continue driving while waiting for a more thorough repair. It is important to remember that this solution is temporary, and it is always advisable to consult a specialized mechanic for a permanent and safe repair.

Epoxy resin for repairing car radiator pipe

Epoxy resin is an excellent material for repairing a car radiator pipe. To carry out the repair, carefully follow these steps:

1. Make sure the pipe is clean and dry.
2. Use sandpaper to lightly sand the damaged area.
3. Apply the epoxy resin directly to the cracks or holes.
4. Allow it to completely cure according to the manufacturer's instructions.
5. Check for any water leaks before putting the car back into operation. Epoxy resin ensures a solid and long-lasting repair, but it is advisable to consult a qualified mechanic to verify that the repair has been carried out correctly.

How to Repair a Car Radiator Pipe with Epoxy Resin

To repair a car radiator pipe with epoxy resin, follow these steps:

1. Preparation: Make sure the engine is cold. Locate the leakage point and dry the area thoroughly.
2. Epoxy Resin Application: Thoroughly mix the resin and hardener according to the manufacturer's instructions. Apply the mixture to the crack or hole, ensuring good adhesion.
3. Drying: Allow it to dry for the time indicated on the packaging. Make sure it is completely cured before restarting the engine.
4. Verification: Check for any water leaks after the repair. Remember that this is a temporary solution. It is advisable to replace the radiator pipe as soon as possible.

DIY Car Radiator Hose Repair Tutorial

Repairing a car radiator hose can be done DIY by following a few steps. Here's how to proceed:

1. Identify the leak: locate the damaged area on the radiator hose.
2. Disconnect the hose: unscrew the clamps holding it in place.
3. Cut out the damaged part: remove the damaged section with a utility knife.
4. Prepare the hose: ensure both ends are smooth.
5. Apply a connector: use a connector to join the two ends.
6. Tighten: make sure the connector is securely tightened.
7. Refill the system: top up the radiator with coolant. By carefully following these steps, you can effectively and safely repair the car radiator hose.

Best epoxy resin for car radiator pipe repairs

The best epoxy resin for car radiator pipe repairs is the one specifically formulated to withstand high temperatures and water pressure. Make sure to choose an epoxy resin that is heat and liquid resistant, capable of adhering firmly to the metal of the pipe. Before application, ensure that the surface is clean and dry to ensure better adhesion. Follow the manufacturer's instructions carefully to achieve an effective and long-lasting repair. If in doubt, it is advisable to consult a professional in the automotive industry for a safe and reliable intervention.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85