Repairing brake pipe

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Repairing brake pipe

To repair a damaged brake pipe, you need to follow these steps:

1. Identify the leak or damage in the brake pipe.
2. Safely lift the car and secure it with jack stands.
3. Drain the brake fluid from the system using a specific pump.
4. Cut the damaged part of the brake pipe with a specific tool.
5. Install a brake pipe connector to join the two pieces.
6. Ensure that the connector is tightly secured and sealed.
7. Fill the system with new brake fluid.
8. Bleed the brakes to remove any air bubbles.
9. Check for leaks and ensure the brakes are functioning properly. By carefully following these steps, it is possible to effectively and safely repair a damaged brake pipe.

Epoxy resin for repairing brake pipe

Epoxy resin is an excellent solution for repairing a damaged brake pipe. First of all, make sure to clean the area around the pipe thoroughly to ensure better adhesion. Measure the length of the crack or hole to be repaired accurately and prepare the epoxy resin following the manufacturer's instructions. Apply the resin to the damaged area and ensure it is evenly distributed. Let it dry completely according to the recommended curing times. Once dry, the resin will form a durable coating that will effectively repair the brake pipe. Always remember to check the compatibility of the epoxy resin with the brake pipe material for a safe and effective repair.

How to repair a silicone brake hose

Repairing a silicone brake hose requires attention and precision to ensure the vehicle's safety. Here are the steps to follow:

1. Identify the damage: locate the damaged area on the silicone brake hose.
2. Cut the hose: using a utility knife, remove the damaged part.
3. Clean the hose: make sure both sides are clean and free of residues.
4. Connect the two ends: use hose clamps to connect the two pieces.
5. Test the repair: check for leaks or sealing issues. It is advisable to consult a professional for more complex repairs or if unsure.

DIY brake line decorating pigments

DIY brake line decorating pigments offer a creative way to customize your vehicle. Before applying the pigments, make sure to thoroughly clean the brake line to remove dirt and grease. Next, mix the pigment with an epoxy resin or heat-resistant silicone. Apply the mixture to the brake line in thin and uniform layers, allowing it to dry between each application. Once the decoration is complete, seal it all with a weather-resistant clear coating to protect the finished work. Always remember to follow safety regulations when handling materials and consult a professional for any doubts.

Creative hobby: repairing brake pipe with resin

Repairing a brake pipe with resin is a common DIY activity in the automotive sector. To do this, follow these steps:

1. Isolate the damaged area.
2. Clean the pipe with solvent to remove grease and dirt.
3. Lightly sand the damaged surface.
4. Prepare the resin and apply it to the pipe, making sure it covers the damaged area well.
5. Allow the resin to dry completely.
6. Ensure that the repair is solid before using the brake pipe again. Always remember to follow the manufacturer's resin guidelines and have the repair checked by a professional to ensure the vehicle's safety.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85