Repairing fuel connections

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Repairing fuel connections

Repairing fuel connections is a crucial operation to ensure the proper functioning of the engine's fuel system. Damaged connections can lead to fuel leaks, compromising the efficiency and safety of the vehicle. To carry out the repair, it is necessary to identify the exact point of the leak and replace any damaged gaskets or fittings. Before proceeding with the repair, it is advisable to check for any other abnormalities in the fuel system and ensure that the connections are tightly secured. If in doubt or facing difficulties, it is advisable to seek assistance from a professional in the automotive industry.

Repairing fuel pipes

Repairing fuel pipes is a fundamental operation to ensure the safety and proper functioning of the vehicle. To carry out this operation effectively, it is important to follow some key steps:

1. Identify the exact point of the leak in the fuel pipe.
2. Turn off the engine and make sure there are no open flames nearby.
3. Remove the damaged section of the pipe using appropriate tools.
4. Cut a new section of pipe to the correct size.
5. Install welds or fittings to connect the new section to the existing pipe securely.
6. Thoroughly test the system to verify that there are no further leaks. By carefully following these steps, it is possible to effectively repair fuel pipes and ensure the proper functioning of the vehicle's fuel system.

Replacing fuel gaskets

Replacing the gaskets of the fuel supply system is a crucial operation to ensure the efficiency and safety of the vehicle. Performing this preventive maintenance helps prevent fuel leaks, reducing the risk of fires and engine damage. Before proceeding, make sure to have gaskets compatible with the type of fuel and carefully follow the assembly instructions. During the intervention, it is important to check the condition of the pipes and connections to identify any signs of wear or damage. Finally, check for fuel leaks after installing the new gaskets.

Repairing fuel leaks

To repair fuel leaks, it is essential to accurately identify the cause of the problem. Leaks can be due to damaged gaskets, worn-out flexible hoses, or punctured tanks. Acting promptly is important to avoid risks of fires and environmental damage. Here are some steps to follow for the repair:

1. Isolate and secure the area.
2. Identify the leak and thoroughly clean the surrounding area.
3. Assess the extent of the damage and replace the damaged parts.
4. Ensure that the fuel system is properly sealed.
5. Perform a pressure test to ensure there are no further leaks. In case of doubts or significant leaks, it is advisable to consult a professional in the industry.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85