Repairing motorcycle fuel pipe

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Repairing motorcycle fuel pipe

To repair a motorcycle fuel pipe, it is necessary to follow some important steps:

1. Locate the leak: carefully inspect the pipe to identify the damaged area.
2. Disconnect the pipe: make sure the engine is off and the fuel has been removed.
3. Cut out the damaged part: using a utility knife, remove the damaged section of the pipe.
4. Install a connector: insert a plastic or metal connector onto the pipe to join the two ends.
5. Seal the connector: use hose clamps to secure the connector in place. Ensure that the repaired pipe is properly sealed before restarting the engine. If you are unsure, it is advisable to consult a specialized mechanic.

- Motorcycle fuel pipe repair

To repair a damaged motorcycle fuel pipe, you can follow these steps:

1. Identify the damage: inspect the pipe to identify any cracks, cuts, or leaks.
2. Cut the pipe: if the damage is localized, cut out the damaged part using a utility knife.
3. Replace the pipe: if the damage is extensive, replace the entire pipe with a new one made of material resistant to gasoline.
4. Use a connector: for small damages, you can use a fuel pipe connector to seal the leak.
5. Ensure tight connections: make sure the connectors are securely tightened to prevent leaks. By carefully following these steps, you can effectively repair the fuel pipe of your motorcycle.

Replacing scooter fuel line

To replace the fuel line of a scooter, it is necessary to carefully follow these steps:

1. Make sure the scooter is turned off and cold.
2. Locate the damaged fuel line, usually located between the tank and the engine.
3. Carefully remove the old line, being careful to avoid fuel leaks.
4. Cut the new line to the correct size and securely connect it to the ends.
5. Ensure the line is securely attached and has no leaks.
6. Start the scooter and check that the fuel flows correctly through the new line.
7. If everything is working correctly, reposition any covers or fairings removed during the process.

Fuel line gasket for motorcycle

Gaskets for motorcycle fuel lines play a crucial role in ensuring the tight seal of the fuel supply system. Made of materials such as rubber, silicone, or other special resins, these gaskets prevent fuel leaks and protect the engine from potential external infiltrations. It is important to regularly replace the gaskets to avoid sealing issues that could compromise the performance and safety of the motorcycle. Make sure to choose specific gaskets for the fuel line based on the motorcycle model and to install them correctly to ensure optimal operation of the fuel system.

Repairing motorcycle fuel leak

To repair a fuel leak on the motorcycle, it is important to follow some key steps:

1. Identify the cause of the leak, which could stem from damaged gaskets, worn flexible hoses, or a damaged tank.
2. Turn off the engine and avoid flames or heat sources.
3. Safely remove the remaining fuel.
4. Replace the damaged parts, such as gaskets or flexible hoses.
5. Ensure there are no further leaks before restarting the motorcycle.
6. If in doubt or difficulty, consult a specialized mechanic.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85