Repairing worn gaskets

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Repairing worn gaskets

Repairing worn gaskets is a common operation to ensure the watertight seal of various components. To perform this repair, it is necessary to follow some steps:

1. Carefully remove the damaged gasket, avoiding damage to surrounding components.
2. Thoroughly clean the seat where the new gasket will be placed.
3. Apply a thin layer of silicone grease on the new gasket to promote a better seal.
4. Place the new gasket in its housing, being careful not to damage it.
5. Ensure that the gasket is correctly positioned and that there are no cracks or dirt.
6. Reassemble the component where the gasket has been repaired and check for any leaks. By carefully following these steps, it will be possible to effectively repair worn gaskets.

Replacing old gaskets

Replacing old gaskets is an important operation to ensure the efficiency of various components, such as faucets, doors, and windows. To carry out this operation, follow these steps:

• Identify the type of gasket to replace.
• Carefully remove the old gasket using a specific spatula or cutter.
• Thoroughly clean the contact surface.
• Cut the new gasket to the correct dimensions.
• Apply the new gasket by gently pressing to ensure good adhesion.
• Check for any drafts or leaks. By following these steps, you can ensure that the gaskets are replaced correctly and effectively perform their sealing function.

How to Repair Damaged Seals

To repair damaged seals, you can follow these steps:

1. Thoroughly clean the damaged area to remove residues and grease.
2. Evaluate the type of seal that is damaged (e.g. rubber, silicone, etc.).
3. Purchase an epoxy resin or silicone suitable for the type of seal.
4. Cut and remove the damaged seal.
5. Apply the resin or silicone evenly on the damaged area.
6. Allow it to dry completely following the manufacturer's instructions.
7. Verify that the repair is effective and the seal is properly sealed. By following these steps, it is possible to effectively and durably repair damaged seals.

Restoring worn gaskets' sealing

To restore the sealing of worn gaskets, you can follow these steps:

1. Thoroughly clean the surface where the gasket is located.
2. Carefully remove the damaged gasket to avoid further surface damage.
3. Verify that the new gasket is compatible with the material and the type of application.
4. Apply a thin layer of silicone or adhesive resin on the contact surface.
5. Place the new gasket uniformly and press gently to ensure adhesion.
6. Allow the adhesive material to dry and harden completely before using the object again. By following these steps, it will be possible to effectively and durably restore the sealing of the gaskets.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85