Sealing a scooter fuel pipe

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Sealing a scooter fuel pipe

To seal a fuel pipe on a scooter, it is advisable to use a specific epoxy resin that is resistant to liquids and fuels. Follow these steps to effectively seal the pipe:

1. Thoroughly clean the area around the pipe to remove dirt and grease.
2. Ensure the pipe is completely dry before proceeding.
3. Prepare the epoxy resin according to the manufacturer's instructions.
4. Apply the resin around the damaged area of the pipe, making sure to completely cover the leak point.
5. Allow the resin to harden for the necessary time specified on the product.
6. Check for fuel leaks before using the scooter again. Sealing the fuel pipe with epoxy resin is an effective solution to repair small cracks or holes and ensure safe vehicle operation.

- Sealing motorcycle tank

To effectively seal a motorcycle tank, it is advisable to use specific epoxy resins for fuel tanks. Before proceeding, make sure to thoroughly clean the inner surface of the tank to remove any fuel and grease residues. Next, apply the epoxy resin following the manufacturer's instructions carefully. Ensure that the product is fuel-resistant and has optimal adhesion properties on metal. Once cured, the resin will form a protective coating that prevents leaks and corrosion in your motorcycle tank. It is recommended to allow the resin to fully dry before reusing the motorcycle.

Repairing epoxy resin leak

To repair an epoxy resin leak, it is necessary to follow some precise steps:

1. Identify the leak and thoroughly clean the surrounding area.
2. Prepare a new mixture of epoxy resin, making sure it is of the same type as the original one.
3. Apply the resin to the damaged area and ensure it spreads evenly.
4. Allow it to cure for the time recommended by the manufacturer.
5. If necessary, sand and finish the surface to make it uniform.
6. Verify that the repair is effective and that there are no further leaks.

Protecting silicone fuel hose

Protecting a silicone fuel hose is essential to ensure durability and safety. It is recommended to use epoxy resins to create a protective layer resistant to mechanical stress and weather agents. Before application, make sure the hose is clean and free of grease or dust. Then, evenly spread the epoxy resin along the hose surface and let it cure completely. This coating will help protect the silicone fuel hose from abrasion, corrosion, and external damages, extending its lifespan and ensuring the safe operation of the fuel supply system.

Sealing epoxy resin tank joints

Sealing the tank joints with epoxy resin is a fundamental step to ensure optimal and long-lasting sealing. To do this correctly, follow these simple instructions:

1. Thoroughly clean the joints, removing any residues of old gaskets or dirt.
2. Prepare the epoxy resin following the manufacturer's instructions carefully.
3. Apply the resin on the joints evenly, making sure to completely cover the surfaces to be sealed.
4. Let the resin dry for the necessary time indicated on the product.
5. Verify that the seal is well sealed and resistant before using the tank. By following these steps, you can ensure effective protection and sealing for your tank.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85