💥 About RESINSTONE one-component methacrylic resin is a high-performance solution formulated specifically for sealing and protecting concrete floors, including stamped floors and driveways. This low-viscosity liquid deeply penetrates concrete surfaces via capillary absorption, providing superior moisture protection while enhancing mechanical resistance and scratch resistance. It offers excellent protection against chemical and oil exposure, making it ideal for both industrial and domestic environments. Designed for professional contractors and home DIYers, RESINSTONE ensures ease of use with fast drying times and outstanding durability. 💡 Key Benefits Deep capillary penetration – Ensures thorough sealing by absorbing into concrete pores for lasting protection. 🌟 Enhanced moisture protection – Effectively blocks water and damp while remaining breathable to prevent trapped moisture. Scratch resistance & chemical/oil resistance – Guards surfaces against scratches, chemical agents, and oil stains, maintaining appearance and integrity. 💪 Exceptional durability – Provides resistance to UV rays, extreme weather, yellowing, and acid rain. Fast application – Simple pour-over method requiring no mixing; dries within 12 hours for quick turnaround. ⚡ Versatile usage – Suitable for indoor and outdoor areas such as garages, patios, garden paths, and stamped floors. 🏡 ☝🏽 Useful Information Application timing – Can be applied just 8 hours after pouring concrete, integrating seamlessly with new surfaces. Temperature range – Functional between +5°C and +35°C for wide-ranging conditions. Special features – Dustproof, breathable (water vapour permeable), and anti-carbonation for long-lasting protection. Safety – Use appropriate personal protective equipment (PPE) during application to ensure safety. 🎯 Who It’s For – Professional contractors and builders seeking industrial-grade performance – Homeowners and DIY enthusiasts tackling concrete floor projects Choose RESINSTONE for a simple yet powerful way to protect and extend the life of concrete surfaces, including stamped floors, with reliable, long-lasting, and scratch-resistant protection.
£29.85
HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS This flat Coaster Mould has a smooth interior and produces a beautiful coaster with a professional finish. Use our heat-resistant resin to make something that is not only functional. Dimensions: D.21 cm Height: 0.8cm If you're using these moulds to make coasters, we recommend that you add a 3mm thick clear layer of Heat-Resistant resin first in your mould. Let it set and then add more resin with colour, ink, glitter, flowers etc. Once turned out (after 3-4 days), what was the bottom will be the top and heat-resistant up to 20oC! Remember that our Heat-Resistant resin needs between 72 h to achieve full cure, so don't place a hot cup on it too early. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean. Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F] Attention! Remove the product from the mold no later than 12 hours after pouring the resin. Otherwise, there is a chance of local adhesion of the resin to the mold.
£10.00
💥 About Restore and transform broken ceramics with the Kintsugi Ceramic Repair Kit, specifically designed for traditional kintsugi repairs. Suitable for repairing porcelain, ceramic bowls, plates, vases, and more, this all-in-one set allows you to highlight cracks with beautiful metallic pigments in gold, silver, or copper. Perfect for hobbyists, craft enthusiasts, and for repairing cracked or broken ceramic and porcelain items using kintsugi. 💡 Key Benefits - Premium Epoxy Resin – Slow-curing formula ensures strong, bubble-free bonding ✨ - Three Metallic Pigments on choice – Customise each repair with a choice of gold, silver, or copper highlights 🌟 - Complete Toolbox – Includes gloves, mixing cups, pipettes, and spatulas for precise application 🧤 - Step-by-Step Instructions – User-friendly guide so beginners and experienced makers achieve perfect results 📚 ☝🏽 Useful Information - Eco-Friendly – Cruelty-free and vegan-friendly components - Versatile Application – Ideal for decorative ceramic and porcelain restoration 🎯 Who It’s For - Hobbyists and DIY enthusiasts - For repairing cracked or broken ceramic and porcelain items using kintsugi Celebrate the beauty of imperfections and give new life to cherished ceramics with this kintsugi repair kit. Full instructions provided for reliable results every time.
£17.85
💥 About The Resin Fibreglass Repair Kit 720g is the ultimate solution for emergency repairs, providing powerful structural reinforcement thanks to a dense 300g/m² fibreglass mat. This professional-grade fibreglass and orthophthalic polyester resin system creates a completely waterproof, impact-resistant, and durable bond, ideal for pressure-bearing repairs such as pipes or constant water exposure like boats and swimming pools. It offers excellent adhesion to fibreglass, metal, wood, porcelain, and rigid plastics, making it suitable for marine, automotive, industrial, and domestic applications. 💡 Key Benefits All-in-one repair kit – Contains 700g orthophthalic polyester resin, 20ml hardener, 1m² fibreglass mat, brush, gloves, and mixing container 🧰 Superior bonding strength – Creates robust, long-lasting reinforcement for composite and rigid surfaces 💪 Waterproof and versatile – Perfect for boats, canoes, pools, cars, tanks, roofs, pipes, and other rigid composites under pressure or in water contact 🚤 Clear step-by-step instructions – Ensures easy application even for beginners 📄 ☝🏽 Useful Information Kit contents – Fully equipped to start your repair here and now: 700g polyester resin, 20ml hardener (3% ratio), 1m² fibreglass mat (300g/m²), brush, gloves, mixing container, and clear instructions Material compatibility – Excellent adhesion on fibreglass, metal, wood, porcelain, polyester, and rigid plastics 🎯 Who It’s For – DIY enthusiasts seeking reliable composite repairs – Professionals in marine, automotive, or industrial restoration – Anyone needing to repair or seal rigid structures Don’t let leaks or cracks slow you down—get your Resin & Fibreglass Repair Kit today for fast, professional-grade results!
£13.85
Sealing cracks in fittings
To seal cracks in fittings, it is advisable to use epoxy resins or specific silicones for coatings. These materials are designed to provide an effective and long-lasting seal, preventing water infiltrations and protecting surfaces from weather agents and corrosion. Before application, make sure that the surfaces are clean, dry, and free from residues of old sealants. Apply the sealing material evenly and make sure to completely seal the cracks. Follow the manufacturer's instructions carefully to achieve the best results and ensure a proper seal over time.
EPOXY RESIN FOR SEALING CRACKS IN PIPE FITTINGS
Epoxy resin is an excellent material for sealing cracks in pipe fittings. Once cured, this type of resin creates a durable and waterproof coating that prevents leaks of liquids or gases. To seal cracks in pipe fittings with epoxy resin, it is important to clean the surface thoroughly, mix the resin accurately, and apply it evenly over the cracks to be sealed. Allow it to dry completely to ensure optimal sealing. Epoxy resin is widely used in the DIY and construction sector for long-lasting and reliable repairs.
Epoxy Resin Joint Sealant
The epoxy resin joint sealant is a specific product for finishing and protecting joints made with epoxy resins. This sealant, formulated to ensure perfect adhesion to the epoxy resin, is ideal for creating a uniform surface resistant to external aggressions. When applied correctly, the epoxy resin joint sealant helps improve the aesthetic appearance of the finished work and extend its durability over time. Before using this product, make sure to carefully follow the manufacturer's instructions to achieve the best possible results.
DIY Crack Repair Joints
DIY crack repair joints are used for repairing and connecting cracks and fissures on different surfaces. These joints are usually made of materials such as epoxy resins and silicone, designed to ensure strong adhesion and durability over time. To properly use DIY crack repair joints, it is important to clean and prepare the damaged surface carefully before application. Subsequently, proceed with applying the joint inside the crack, ensuring it is well positioned and pressed to ensure proper adhesion. Finally, it is advisable to carefully follow the manufacturer's instructions to achieve the best possible results in crack repair.
Epoxy Resin Sealing Technique
The epoxy resin sealing technique is a process used to protect surfaces from harmful external agents such as humidity, dust, and chemicals. Epoxy resin is a resistant and durable material, ideal for creating a transparent and waterproof protective layer. To correctly apply epoxy resin for sealing, it is necessary to thoroughly clean the surface, carefully mix the resin and the hardener according to the manufacturer's instructions, and evenly apply the compound. After application, it is important to let the resin dry completely to ensure an effective and long-lasting seal.
This BEGINNER kit includes: -8 kg epoxy resin for castings up to 2 cm -Glossy “Shiny Shield” release film (32cm*2m) -500gr Non-toxic silicone paste to seal your frame -Polishing KIT (polishing pads 6pcs + professional polishing paste 250ml) -2 True Green pigment pastas -Detailed instructions on how to create the formwork step by step and pour the resin. 🎁Free gloves + mixing sticks + Instruction The kit is sufficient to create a table with an area of 0.5 m2 (e.g. 45 cm x 80 cm, thickness 2 cm) – These quantities are calculated by simulating a “classic” 2/3 wood and 1/3 resin table. For any queries or if you may need some advice, please contact the ResinPro technical team.
£188.85
💥 About The Cutting Board Oil is your go-to choice for protecting and rejuvenating wooden kitchen essentials, including chopping boards, butcher blocks, and kitchen utensils. Ideal for both food preparation and resin art, this food-grade mineral oil ensures your wooden items remain safe and preserved. 💡 Key Benefits Ultimate Protection – Forms a barrier that seals wood from moisture and prevents cracking. 🛡️ Food-Safe – Made from pure mineral oil, ensuring no harm when used on food preparation surfaces. 🍴 Easy Application – Quickly applies to surfaces for immediate results, saving you time. ⏱️ Restore and Enhance – Revives the natural beauty of wood, showcasing its colour and character. 🌟 ☝🏽 Useful Information Volume – One 250ml bottle treats a chopping board roughly 50 times. Expiry – Once opened, use within 3 years for best results. 🎯 Who It’s For – Home cooks looking to maintain their kitchen tools – DIY enthusiasts involved in woodworking or epoxy crafting – Professional chefs or caterers needing high-quality maintenance products This Cutting Board Oil will help prolong the life of your wooden items, ensuring they remain in top condition for all your culinary adventures and crafting projects.
£11.45
Design your own statement timepiece with our Circle Resin Clock Blank, made from quality 6mm MDF and pre-drilled with an 8mm centre hole for standard clock mechanisms. Ideal for epoxy resin clock making, plus acrylic pours, pigments, metallic accents and mixed media finishes. Features 8mm centre hole for clock mechanism fitting 6mm MDF for a sturdy, flat clock base Smooth face + clean edges for professional-looking results Size options: 40 cm / 50 cm diameter Resin-ready tips (recommended)Seal/prime MDF before pouring (especially edges) for best results. Lightly sand, apply a suitable primer/sealer (e.g., gesso or MDF sealer), tape the underside, and pour on a level surface.
£15.90
This Futuristic Cut-Out Round Resin Clock Blank is made for statement pieces—especially galaxy pours, neon pigments and high-contrast colourways. Cut from quality 6mm MDF with an 8mm centre hole, it’s ready for your mechanism and your creativity. Features Distinctive cut-out numeral style 8mm centre hole for clock fitting 6mm MDF base for strength and stability Smooth face for clean pours and crisp edges Size: 50 cm diameter Resin-ready tips (recommended)Seal/prime MDF before pouring (especially edges) for best results. Lightly sand, apply a suitable primer/sealer (e.g., gesso or MDF sealer), tape the underside, and pour on a level surface.
£24.90
Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook
