Fine sanding

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Fine sanding

Fine sanding is a process that involves removing small surface defects from materials such as wood, metal, or plastic, in order to achieve a smooth and uniform surface. This operation is typically carried out using very fine grit sandpaper or specific abrasive discs. Fine sanding is essential in many sectors, such as construction, woodworking, metalworking, and also in the DIY field. Thanks to fine sanding, it is possible to prepare surfaces for subsequent painting or the application of protective coatings, ensuring a high-quality and resistant final result.

Fine sanding of epoxy resin

Fine sanding of epoxy resin is a fundamental step to achieve a smooth and glossy surface. To carry it out correctly, it is advisable to follow these steps:

1. Use fine or superfine sandpaper to remove any imperfections and level the surface.
2. Apply uniform pressure during sanding to avoid burrs or irregularities.
3. After sanding, thoroughly clean the surface to remove dust and residues.
4. If necessary, apply an additional thin layer of epoxy resin to restore the shine. By carefully following these suggestions, it is possible to achieve an impeccable final result on finely sanded epoxy resin.

Epoxy Silicone Sanding Techniques

Sanding epoxy silicone requires precision and attention to achieve optimal results. Here are some recommended techniques:

• Use fine-grit sandpaper to gently sand the surface.
• Apply light pressure and move the sandpaper evenly to avoid streaks.
• Progress to finer grits as the rough surface is removed.
• Use a damp cloth to remove dust between sanding sessions.
• Finally, polish the surface with a specific polishing compound for epoxy silicone for a shiny and uniform result. By following these techniques, it is possible to achieve a professionally sanded and polished surface.

How to Achieve a Smooth Surface with Pigmented Resin

To achieve a smooth surface with pigmented resin, follow these steps:

1. Prepare the surface: Make sure the surface is clean, dry, and free of dust and grease.
2. Mix the resin and the hardener: Follow the manufacturer's instructions carefully to mix the resin with the hardener in the correct ratio.
3. Add the pigment: Mix the colored pigment into the resin and hardener mixture and stir well to distribute it evenly.
4. Pour and level: Pour the pigmented resin onto the surface and spread it evenly with a brush or a spatula. Ensure the surface is leveled properly to avoid imperfections.
5. Let it dry: Allow the resin to dry following the recommended curing times provided by the manufacturer. By following these steps, you will achieve a smooth and uniform surface with pigmented resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85