P400 finish

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

P400 finish

The P400 finish refers to sandpaper with a grain size of 400. This type of finish is particularly fine and is commonly used to sand delicate surfaces or to prepare them for painting. Sandpaper with a P400 finish is ideal for removing small defects, sanding wood, plastic, resins, or metals before applying coatings or for DIY projects. Thanks to its fine grain, the P400 finish ensures a uniform and smooth result without visible lines or scratches, helping to achieve a perfectly sanded surface ready for further treatments.

How to Achieve a Glossy Finish with Epoxy Resin

To achieve a glossy finish with epoxy resin, follow these steps:

1. Prepare the surface: Make sure the surface is clean, dry, and free of dust or grease.
2. Mix the epoxy resin: Follow the manufacturer's instructions carefully to mix the resin and hardener in the right proportion.
3. Apply the resin: Pour the resin onto the surface evenly, avoiding build-ups and air bubbles.
4. Level and wait: Use a brush to evenly distribute the resin and let it settle for a few minutes.
5. Remove air bubbles: Gently pass a torch or a heat gun over the surface to eliminate air bubbles.
6. Let dry and polish: Allow the resin to cure for the recommended time and, if necessary, polish the surface with fine sandpaper and polish to achieve a flawless glossy finish.

**Tutorial for Creating Silicone Molds with a Professional Finish**

To create silicone molds with a professional finish, follow these steps:

1. Preparation: Thoroughly clean and dry the object on which the silicone will be applied.
2. Silicone Selection: Choose a quality silicone resin suitable for your purpose (e.g., for 3D printing or waterproof coatings).
3. Measurement and Mixing: Carefully follow the manufacturer's instructions to measure and mix the resin and catalyst in the correct ratio.
4. Application: Pour the silicone onto the object evenly, avoiding air bubbles. A brush can be used to distribute it more effectively.
5. Curing: Allow the silicone to dry for the necessary time indicated in the instructions, until achieving a professional finish. By following these steps diligently, you can create silicone molds with a high-quality finish.

Pigments for creating custom finishes with epoxy resin

Pigments for creating custom finishes with epoxy resin are concentrated colorants specially formulated to be mixed with liquid epoxy resin. These pigments allow for a wide range of vibrant and personalized colors to be achieved for creating artistic and decorative surfaces. Thanks to their high concentration, they can be easily dosed to obtain intense or translucent shades according to the needs. Users can experiment by mixing different pigments together to create unique shades and special effects. It is important to carefully follow the manufacturer's instructions to ensure proper mixing and achieve optimal results in finishes with epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85