Air bubbles in thin inclusions

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Air bubbles in thin inclusions

Thin inclusions in air resin are small particles or air bubbles trapped inside the material during the processing. These inclusions can compromise the aesthetic appearance and quality of the resin, reducing the transparency and gloss of the finished product. To avoid the formation of thin inclusions, it is essential to adopt appropriate techniques during the mixing and processing of the resin. It is advisable to use suitable tools to eliminate air bubbles and ensure that the working environment is free from impurities that could contaminate the resin. Furthermore, it is important to scrupulously follow the manufacturer's instructions and use high-quality resins to achieve optimal results.

How to Create Thin Resin Inclusions

Thin resin inclusions can be achieved by following these steps:

1. Prepare the resin and pour a thin layer into your mold.
2. Wait for the resin to become tacky, but not fully cured.
3. Carefully place the objects to be included on the semi-cured resin.
4. Pour another thin layer of resin over the objects, completely covering them.
5. Use a stick to gently push the objects into the inclusion.
6. Remove any air bubbles with a gas torch or a stick.
7. Let the resin fully cure following the manufacturer's instructions. By creating thin resin inclusions with care and precision, you will achieve professional and high-quality results.

**Tutorial: Creating Thin Inclusions with Epoxy Resin**

Thin inclusions in epoxy resin are a precious detail for creating unique jewelry or art objects. To make them, it is essential to carefully follow some steps:

1. Prepare the support: make sure it is clean and level.
2. Measure the resin and the hardener accurately following the manufacturer's instructions.
3. Mix gently to avoid air bubbles.
4. Pour the resin into the molds, being careful not to overflow.
5. Add the decorative elements with care and precision.
6. Let it dry completely following the recommended times.
7. Carefully remove the objects from the molds. By following these steps, you will be able to create perfect thin inclusions with epoxy resin.

Ideas for subtle inclusions in epoxy resin

Subtle inclusions in epoxy resin are fascinating and delicate details that add a special touch to any artistic creation. Here are some ideas for successfully creating them:

• Use dried flowers, leaves, or petals to create natural and evocative inclusions.
• Experiment with translucent pigments or metallic colors for a brilliant and luminous effect.
• Incorporate fragments of gold or silver leaves for a touch of elegance.
• Create designs or geometric patterns with metallic wires or sequins for a modern look.
• Try inserting small pieces of fabric or lace for a vintage and romantic touch. Experiment and unleash your creativity to achieve unique and personalized inclusions!

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85