Defects in resin for unleveled surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Defects in resin for unleveled surfaces

Resins for unleveled surfaces may present some common defects to take into consideration:

1. Insufficient adhesion: the resin may not properly adhere to the uneven surface, causing detachment or cracking.
2. Air bubbles: during application, air bubbles can form under the resin, compromising the final appearance and durability of the coating.
3. Lifting: if the surface is not properly prepared, the resin may lift over time, creating unpleasant bulges.
4. Inconsistencies: on unleveled surfaces, the resin may highlight underlying imperfections rather than hide them, compromising the final aesthetics. It is essential to thoroughly prepare the surface before application to avoid these defects and ensure a uniform and durable final result.

How to Level Non-Flat Epoxy Resin

To level non-flat epoxy resin, you can follow these steps:

1. Preparation: Ensure that the surface is clean and free of dust or residues.
2. Filling: Apply a resin-based filler to fill any imperfections or holes on the surface.
3. Sanding: Use fine-grit sandpaper to sand the resin evenly, removing any lumps or irregularities.
4. Application of Leveling Coating: You can apply a clear epoxy resin leveling coating to achieve a smooth and even surface.
5. Drying: Allow the leveling coating to dry completely following the manufacturer's instructions. By following these steps, you can achieve a smooth and even resin surface even if it was initially not flat.

Solutions for uneven surfaces with epoxy resin

Epoxy resins are a versatile solution for effectively coating uneven surfaces. To achieve optimal results with resins on rough surfaces, it is advisable to follow these steps:

• Properly prepare the surface by eliminating any imperfections and cleaning it thoroughly.
• Apply a specific primer to enhance the adhesion of the resin.
• Use a self-leveling resin or one with a suitable consistency to adapt to the surface irregularities.
• Spread the resin evenly with care to avoid build-ups or uncovered areas.
• Protect the coating with a transparent sealant to ensure durability and resistance over time. By carefully following these tips, it is possible to achieve smooth and uniform surfaces even on uneven substrates using resins.

Fixing uneven surfaces with epoxy resin

To address issues related to uneven surfaces with resin, it is essential to carefully follow a few steps. First of all, prepare the surface ensuring it is clean, dry, and free from dirt or grease. Next, use a self-leveling epoxy resin, ideal for creating a smooth layer on irregular surfaces. Apply the resin evenly, following the manufacturer's instructions regarding dosage and curing times. It is important to work in a well-ventilated environment and use the necessary personal protective equipment. Once the application is complete, allow the resin to dry completely to achieve a uniform and durable result over time.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85