Epoxy bubbles on flat surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy bubbles on flat surfaces

Bubbles in epoxy on flat surfaces can be caused by various factors. To prevent the formation of bubbles during the epoxy pour, it is important to follow some precautions:

1. Ensure that the surface is clean and free from dust or moisture.
2. Use an epoxy suitable for the project and mix it carefully following the manufacturer's instructions.
3. Avoid mixing too quickly to prevent air from being introduced.
4. Use a torch or a degasser to eliminate any bubbles present before the epoxy solidifies.
5. Work in a controlled temperature environment to reduce the viscosity of the epoxy and facilitate air release. By following these guidelines, it is possible to minimize the risk of bubbles in the epoxy on flat surfaces.

How to Remove Epoxy Resin Bubbles

To eliminate bubbles from the resin, it is important to carefully follow these steps:

1. Use a wooden stick or a similar tool to break the surface bubbles without damaging the material.
2. Use a torch to gently heat the resin and bring out the deeper bubbles.
3. Use a syringe to inject fresh resin into the larger bubbles, filling them up and eliminating the air space.
4. Use a heat gun to remove smaller bubbles on the surface.
5. Let the resin cure in a dust-free environment with no air drafts. By carefully following these steps, you can effectively remove bubbles from the resin.

Epoxy Resin Bubbles in DIY Projects

Bubbles in epoxy resin for DIY projects can be caused by various reasons. Here are some possible causes and solutions:

• Mixing: bubbles can form if the resin and hardener are not mixed properly. Make sure to mix slowly and thoroughly to prevent air from getting trapped.
• Application: avoid pouring the resin from too high up or too quickly to reduce bubble formation.
• Heating: slightly heat the resin before use to lower its viscosity and ease the release of bubbles.
• Tools: use a brush or tool to remove bubbles from the surface before the resin solidifies. By following these precautions, you can achieve bubble-free results in your DIY epoxy resin creations.

Epoxy Resin Silicone Mold Bubbles

Bubbles in the resin of silicone molds can be caused by various reasons. To prevent the formation of unwanted bubbles, it is important to follow some precautions during the casting process. Make sure to carefully mix the resin and the catalyst according to the manufacturer's instructions, avoiding the incorporation of air during the mixing. Additionally, it is advisable to use a brush to eliminate any surface bubbles before the resin completely solidifies. If the bubbles persist, you can gently use a syringe to inject resin into the bubbles to fill them. By carefully following these procedures, it is possible to obtain silicone molds free of unwanted bubbles.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85