Epoxy Casting Bubbles in Decorative Slabs

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy Casting Bubbles in Decorative Slabs

Bubbles in epoxy casting for decorative slabs can be a common issue during the processing. To prevent the formation of unwanted bubbles, it is essential to follow some precautions and proper techniques:

1. Make sure to thoroughly mix the resin and hardener for the recommended time.
2. Use a vacuum chamber to eliminate air bubbles before casting.
3. Pour the resin slowly and evenly onto the surface.
4. Use a gas torch to remove any surface bubbles after casting.
5. Avoid overheating the resin during the process. By following these guidelines, it will be possible to obtain decorative resin slabs without unwanted bubbles.

How to Avoid Bubbles in Epoxy Resin Casting

To prevent the formation of bubbles during resin casting, follow these practical tips:

• Make sure to work in a clean, dust-free environment to avoid contamination.
• Thoroughly mix the resin following the manufacturer's instructions to prevent air bubbles.
• Use a vacuum degassing chamber to eliminate bubbles before casting.
• Pour the resin slowly and evenly to minimize air entrapment.
• Use a gas torch or a brush to remove any surface bubbles.
• Cover the resin during the curing process to protect it from dust and debris that could cause bubbles.

Transparent resin for creating slabs

Slabs can be made using transparent resin, a versatile and durable material. To create slabs with transparent resin, it is important to carefully follow these steps:

1. Prepare the materials: procure transparent resin and compatible hardeners, pigments if desired, and molds for the slabs.
2. Measure accurately: follow the manufacturer's instructions to mix the resin and hardener in the correct ratio.
3. Add pigments: if coloring the resin is desired, add the pigments to the mixture and mix well.
4. Pour into the mold: pour the colored resin into the prepared mold and let it dry following the recommended curing times.
5. Remove carefully: once cured, carefully remove the slab from the mold and check that it is perfectly transparent and free of air bubbles. By following these steps, you can create high-quality transparent resin slabs for your DIY projects.

Resin bubbles decorative slabs tutorial

Decorative slabs made with resin and air bubbles represent a fascinating DIY artistic technique. To create these works of art, follow this tutorial carefully:

1. Prepare the resin and slowly add the catalyst to prevent the formation of air bubbles.
2. Pour the resin onto a flat slab and level it evenly.
3. Use a torch to heat the surface and bring out the trapped air bubbles.
4. Add colors or pigments to customize the design.
5. Let the resin dry following the manufacturer's instructions.
6. Once hardened, the decorative slab will be ready to use for creative and decorative projects.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85