Epoxy resin bubbling in flat pendants
The formation of bubbles in the epoxy resin of flat pendants is a common issue in the DIY sector. Air bubbles can be caused by various factors, such as mixing the resin too quickly or pouring it too rapidly. To avoid this inconvenience, it is advisable to mix the resin slowly and carefully to reduce air incorporation. Additionally, it is helpful to let the resin rest for a few minutes after mixing to allow air bubbles to rise to the surface and disappear. Use a torch to eliminate any surface bubbles. By following these simple tips, it is possible to achieve flat resin pendants free of air bubbles.
How to Prevent Bubbles in Epoxy Resin
To prevent the formation of bubbles in epoxy resin during the casting process, it is essential to follow some recommendations:
- Make sure to thoroughly mix the resin and the hardener following the manufacturer's instructions.
- Avoid mixing too quickly to prevent introducing air into the mixture.
- Use a tall and narrow container for mixing to minimize air agitation.
- Let the mixture rest for a few minutes before pouring it into the mold to allow air bubbles to rise to the surface and disappear.
- Use a gas torch or a heat gun to remove any larger bubbles on the surface of the resin once poured into the mold. By following these precautions, you can achieve bubble-free results in your resin work.
Solutions for bubbles in resin pendants
Bubbles in resin pendants can be a common issue, but there are several solutions to solve it:
- Use a hot brush to remove surface bubbles.
- Use a syringe to inject resin into larger bubbles and then cure it with a UV lamp.
- Use a resin with low viscosity to reduce bubble formation during the curing process.
- Use a degreasing agent to remove any residues that could cause bubble formation.
- Work in a controlled temperature and humidity environment to prevent bubbles from forming due to adverse weather conditions. By following these solutions, it is possible to achieve bubble-free resin pendants with a uniform and transparent appearance.
Techniques to Eliminate Bubbles in Epoxy Resin
To eliminate bubbles in epoxy resin, various techniques can be adopted:
- Use a gas torch to heat the resin and bring the bubbles to the surface.
- Mix the resin slowly to avoid air entrapment.
- Use a brush to apply the resin evenly.
- Employ a vacuum degassing chamber to remove air bubbles.
- Slightly warm the resin before use to increase fluidity and facilitate bubble release.
- Use a fine-tipped tool to break surface bubbles. By following these techniques, it will be possible to achieve a smooth surface free of bubbles in epoxy resin.
ResinPro: one supplier for all your needs
15 years of experience at your complete disposal, supplying resins and accessories for creativity, industry, DIY, flooring and marine applications.
At your home, directly from the manufacturer!
ResinPro is the direct manufacturer of our resin range for companies and hobbyists, guaranteeing the lowest prices on the market.
Learn more


The widest range of resins in the UK!
We offer resins for every need, from artistic creations to marine and construction applications, far beyond the “limited” selection typically found in local DIY stores.

Expert technical support!
Our technicians provide free remote consulting to help you avoid mistakes and ensure you achieve the result you want — unlike “generic retailers” who sell 1,000 different products.
get a free consultationRESIN PRO is a leader in resin production and distribution!
24-hour delivery: We ship across the UK on the same day. Enjoy convenient home delivery with our appointment service—our courier will contact you in advance and deliver the package to your preferred location, or leave it at an alternative address of your choice.

Full support!
We provide continuous support from preparation to final application, including remote technical assistance, ensuring a smooth experience.
Talk with a specialist and place a phone order without registration and without credit cards!

Google













