Epoxy resin with bubbles in bas-reliefs

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy resin with bubbles in bas-reliefs

Air bubbles can form in the resin during the creation of bas-reliefs due to various factors, such as too intense material agitation or inaccurate mixing. To avoid this issue, it is important to follow some precautions:

1. Mix the resin slowly and carefully to avoid air entrapment.
2. Use a brush to remove any surface bubbles.
3. Use a resin with low viscosity to facilitate bubble release.
4. Let the resin rest for a few minutes before pouring it into the bas-reliefs.
5. Use a gas torch to eliminate larger bubbles. By following these guidelines, it will be possible to obtain bas-reliefs in resin free of unwanted air bubbles.

How to Remove Bubbles from Epoxy Resin

To remove bubbles from epoxy resin, it is important to follow these steps carefully:

1. Mix the resin and hardener slowly to prevent air from entering.
2. Use a torch or a brush to gently heat the surface of the resin to bring the bubbles to the surface.
3. Run a stick along the surface to release the bubbles upwards.
4. Use a thin brush to push the bubbles towards the edges and release them.
5. Use a heat gun to eliminate smaller bubbles on the surface.
6. Repeat the process if necessary until all bubbles are removed. By following these steps attentively, you will be able to achieve a smooth and bubble-free surface in the resin.

Techniques to avoid bubbles in epoxy resin

To prevent the formation of bubbles in epoxy resin, it is essential to follow specific techniques. Here are some useful tips:

• Ensure you work in a well-ventilated environment to reduce the presence of dust and humidity in the air.
• Thoroughly mix the resin and hardener according to the manufacturer's instructions, avoiding the incorporation of air during the process.
• Use a torch to eliminate larger air bubbles on the surface of the resin.
• Use a fine brush to gently move smaller bubbles towards the outer edges of the piece.
• Utilize a vacuum chamber to completely remove air bubbles before the curing process. By following these techniques, it will be possible to achieve better results and prevent the formation of bubbles in the resin.

**Solutions for Bubbles in Resin Bas-Reliefs**

Bubbles in resin bas-reliefs can be corrected by following some simple solutions:

1. Accurate Mixing: Make sure to thoroughly mix the epoxy resin for the recommended time to avoid air entrapment.
2. Use of a Vacuum Chamber: If bubbles persist, you can use a vacuum chamber to remove air from the resin before pouring it into the bas-relief.
3. Avoiding Overheating: Avoid overheating the resin during the curing process, as heat can lead to air bubble formation.
4. Base Coat: Apply a thin base coat of resin and let it dry before pouring the main layer to reduce bubble formation. By following these solutions, you can achieve bubble-free resin bas-reliefs.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85