Epoxy resin with bubbles in controlled casting

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy resin with bubbles in controlled casting

The presence of bubbles in a resin during controlled casting can depend on several factors. First and foremost, it is important to ensure that the resin is thoroughly mixed to avoid the incorporation of air. Additionally, it is advisable to use a resin with low viscosity and a casting system that minimizes mechanical aggression to the material. Bubbles can also form due to a too high ambient temperature or due to moisture present in the materials. To achieve a bubble-free resin casting, it is essential to carefully follow the manufacturer's instructions and use appropriate equipment for mixing and casting.

Transparent bubble-free resin

Air bubbles can be a common issue when working with transparent resins. To avoid the formation of air bubbles inside the transparent resin, it is important to follow some best practices:

1. Gently mix the resin and hardener to avoid air incorporation.
2. Use a vacuum chamber to remove air bubbles before pouring the resin.
3. Pour the resin slowly and evenly.
4. Use a brush to spread the resin and eliminate any surface bubbles.
5. Allow the resin to settle for a few minutes before applying heat to remove smaller bubbles. By following these procedures, it is possible to achieve a final result with a transparent resin free of air bubbles.

Techniques to prevent bubbles in epoxy resin

To prevent bubbles in epoxy resin during the processing, it is important to follow some specific techniques:

1. Ensure to work in a clean and dust-free environment to reduce the chances of contamination.
2. Mix the resin slowly to avoid introducing air.
3. Use a vacuum deaerator to eliminate air bubbles before pouring the resin into molds.
4. Slightly heat the resin before use to reduce its viscosity and promote the release of bubbles.
5. Use a gas torch to heat the surface of the resin and bring out larger bubbles. By following these techniques, it is possible to achieve more consistent and defect-free results in epoxy resin processing.

How to achieve a perfect resin pour

To achieve a perfect resin pour, follow these steps carefully:

1. Prepare the materials: make sure you have high-quality epoxy resin, hardener, pigments if you want to color the epoxy resin, mixing and pouring containers, gloves, and a mask for safety.
2. Mix thoroughly: follow the manufacturer's instructions to mix the resin and hardener in the right proportion. Mix slowly to avoid the formation of air bubbles.
3. Add pigments: if you want to color the resin, add the pigments in the recommended quantity and mix thoroughly.
4. Pour accurately: pour the resin slowly into your mold or surface, being careful not to create air bubbles.
5. Level and wait: level the resin with a specific tool and let it settle for the time recommended by the manufacturer. Avoid any movements or vibrations during the curing process. By following these steps, you will achieve a perfect resin pour.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85