Epoxy resin with bubbles in small transparent objects

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy resin with bubbles in small transparent objects

Air bubbles can form in transparent resin objects due to various factors, such as improper mixing of the resin and hardener, the presence of moisture in the environment, or atmospheric pressure during the curing process. To prevent bubble formation, it is advisable to use high-quality transparent resin, carefully mix the components following the manufacturer's instructions, and use a vacuum chamber to eliminate trapped air. Additionally, it is important to work in a clean and well-ventilated environment to minimize the risk of contamination and ensure that the objects are completely dry before pouring the resin.

How to Remove Air Bubbles from Clear Epoxy Resin

To remove air bubbles from clear epoxy resin, follow these steps:

1. Thoroughly mix the resin to prevent air introduction during the preparation process.
2. Use a torch to eliminate surface bubbles: pass the flame at a safe distance over the resin to bring the bubbles to the surface.
3. Use a hot brush to channel bubbles outwards or pop them.
4. Employ a vacuum chamber to effectively remove air bubbles from the liquid resin.
5. Avoid mixing the resin too quickly and pouring it from excessive heights to prevent bubble formation.

Transparent resin without bubbles

Air bubbles can compromise the transparency of an epoxy resin. To achieve a flawless result, carefully follow these steps:

1. Preparation: Ensure that the epoxy resin and the hardener are at room temperature.
2. Mixing: Thoroughly mix the resin and hardener for at least 3-4 minutes, avoiding overly fast movements that could incorporate air.
3. Pouring: Slowly pour the resin onto the surface, avoiding disruptions that may create bubbles.
4. Bubble bursting: Use a gas torch to eliminate any bubbles present by quickly passing it over the surface at a distance of about 5-10 cm.
5. Covering: Cover the artifact with a lid to prevent the entry of dust or other particles that could create bubbles. By carefully following these steps, you will achieve a bubble-free transparent resin surface.

Epoxy resin bubbles in small objects

The formation of bubbles in epoxy resin on small objects can be due to various factors. To avoid this issue, it is advisable to take some precautions during the processing:

1. Ensure that the objects are completely dry and free of moisture before pouring the resin.
2. Use an epoxy resin with low viscosity to facilitate the escape of air during the casting process.
3. Use a torch or a brush to eliminate any air bubbles trapped in the resin.
4. Work in an environment with controlled temperature and humidity to reduce condensation formation. By following these guidelines, it is possible to achieve optimal results in creating objects in epoxy resin without the formation of air bubbles.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85