Epoxy Resin with Ring Bubbles

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy Resin with Ring Bubbles

Ring bubbles in resin are a common aesthetic defect that can occur during the casting process. This phenomenon is often due to a rapid release of trapped gas during the resin curing. To prevent the formation of ring bubbles, it is important to follow some best practices:

1. Ensure thorough mixing of the resin and hardener to avoid unmixed areas.
2. Use a vacuum chamber to eliminate air bubbles before casting.
3. Pour the resin slowly and evenly to minimize agitation and the introduction of new bubbles.
4. Use a gas torch to remove surface bubbles after casting. By following these guidelines, it is possible to significantly reduce the formation of ring bubbles in the resin.

How to Remove Bubbles from Epoxy Resin

To remove bubbles from epoxy resin, it is important to follow a few steps. First of all, it is advisable to stir the resin slowly to prevent the entry of air. Additionally, using a gas torch or a hot brush can be helpful in removing surface bubbles. For deeper bubbles, it is recommended to delicately inject resin into the bubbles using a syringe to fill them up. Finally, it is important to let the mixture settle for a few minutes and use a torch to remove any remaining surface bubbles. By following these tips, it will be possible to achieve a flawless result without bubbles in the epoxy resin.

**Tutorial: Silicone Molds for Epoxy Resin**

Creating silicone molds for epoxy resin is a crucial step in producing personalized and detailed artifacts. Here's how to proceed:

1. Prepare the model: Ensure that your object is clean and dust-free.
2. Measure and mix the silicone: Calculate the necessary amount of silicone to cover the object and thoroughly mix the components.
3. Pour the silicone: Place the model in a container and slowly pour the silicone over it, making sure it is completely covered.
4. Wait for the curing time: Let the silicone dry for the specified time.
5. Remove the model, and the new mold will be ready to pour the resin. By following these steps, you can create customized molds for your epoxy resin creations.

Transparent Resin Pigments

Transparent resin pigments are special colorants designed to be mixed with clear resins, such as epoxy or polyurethane resin, in order to give them vibrant and customized colors. These pigments are available in a wide range of colors and shades and are ideal for coating projects, DIY jewelry, art objects, and more. Choosing pigments suitable for transparent resins is important to ensure a uniform blending and high-quality aesthetic results. Be sure to carefully follow the manufacturer's instructions to achieve the best aesthetic and durable results.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85