Epoxy resin with small bubbles

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Epoxy resin with small bubbles

Air bubbles in epoxy resin with small bubbles can be caused by various factors. Here are some possible causes and suggestions to avoid them:

1. Inaccurate measurement: Make sure to carefully follow the resin mixing instructions and use accurate measuring tools.
2. Improper mixing: Mix the resin slowly to avoid air incorporation and make sure to scrape the sides and bottom of the container well.
3. Applying too quickly: Pour the resin slowly and at a low height to minimize air entrapment.
4. Using old or contaminated resin: Ensure to use fresh products that have been properly stored. By following these tips, you can minimize the formation of air bubbles in epoxy resin with small bubbles.

How to Remove Bubbles in Epoxy Resin

To remove bubbles in epoxy resin, you can follow some steps:

1. Use a specific casting resin with lower viscosity to reduce bubble formation.
2. Mix the resin slowly to avoid incorporating air.
3. Use a torch or a warm brush to eliminate surface bubbles.
4. Use a vacuum chamber to remove smaller bubbles inside the resin.
5. Avoid shaking the resin container too much to prevent introducing additional air. By carefully following these instructions, it will be possible to achieve more uniform and bubble-free results in resin processing.

Techniques to Avoid Bubbles in Epoxy Resin

To prevent the formation of bubbles in the resin, it is essential to follow some specific techniques. Here are some useful tips:

• Make sure to thoroughly mix the epoxy resin and hardener for the recommended time, avoiding overly vigorous movements that could introduce air.
• Use a transparent measuring container to spot any bubbles already present in the mixture.
• Let the mixture rest for a few minutes before use to allow air bubbles to rise to the surface.
• Use a gas torch or a heat gun to eliminate larger bubbles on the surface of the resin.
• Avoid working in overly humid environments or extreme temperatures, which could promote bubble formation. By carefully following these guidelines, it will be possible to achieve a bubble-free epoxy resin work.

Tips for small bubbles in resin

Small bubbles in resin can be annoying during the processing. Here are some useful tips to avoid or minimize them:

• Make sure to thoroughly mix the resin and hardener for at least 2-3 minutes, avoiding the incorporation of air.
• Use a gas torch to eliminate surface bubbles: quickly pass the flame over the resin to bring them to the surface.
• Let the mixture rest for a few minutes before pouring it into the molds, so that the bubbles can rise to the surface and be eliminated.
• Use a syringe to pour the resin slowly and accurately, thus reducing the formation of bubbles.
• If the bubbles persist, you can use a degreasing agent to reduce the surface tension and facilitate the escape of the bubbles.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85