How to achieve a clean resin pour

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

How to achieve a clean resin pour

To obtain a clean resin pour, it is essential to carefully follow some key steps:

1. Surface preparation: Ensure that the surface where the resin pour will be carried out is perfectly clean, dry, and free from dust or grease residues that could compromise the adhesion of the resin.
2. Accurate mixing: Follow the manufacturer's instructions for the resin and catalyst mixing process, ensuring a proper chemical reaction.
3. Air bubble removal: Use a suitable method, such as vacuum degassing or a tool like a gas torch, to eliminate air bubbles trapped in the resin.
4. Leveling and protection: Make sure to level the pour surface properly and protect it from dust and external agents during the curing process. By carefully following these steps, it will be possible to achieve a clean and high-quality resin pour.

Improving the finish of epoxy resin

To enhance the finish of epoxy resin, it is advisable to follow some fundamental steps:

• Carefully sand the surface of the resin to remove any imperfections and achieve a smooth and uniform surface.
• Apply a thin layer of specific primer for resins to promote adhesion of the subsequent coating.
• Use a transparent or glossy coating to protect the resin and give it a shiny and durable appearance over time.
• If necessary, carry out a final polish to eliminate any opacity and achieve an even shinier finish. By following these tips, it is possible to achieve a flawless finish on the resin surface.

Tips to Prevent Bubbles in Epoxy Resin

Preventing bubbles in epoxy resin is essential to achieve high-quality results in DIY projects. Here are some useful techniques to prevent bubble formation during the resin casting process:

• Make sure to work in a well-ventilated environment to reduce bubble formation due to humidity and particles suspended in the air.
• Thoroughly mix the resin and the hardener following the manufacturer's instructions to avoid air incorporation.
• Use a brush to spread the resin evenly and prevent bubble formation.
• Use a gas torch or a deaerator to eliminate bubbles already present in the resin before casting.
• Avoid excessive stirring or pouring the resin from high distances to minimize air entrapment. By following these techniques, you can achieve smooth, bubble-free finishes in your resin projects.

How to achieve a glossy surface with epoxy resin

To achieve a glossy surface with epoxy resin, it is essential to carefully follow a few steps. First of all, make sure to properly prepare the working surface by sanding and thoroughly cleaning it. Next, mix the resin with the hardener following the proportions recommended by the manufacturer. Pour the mixture onto the surface evenly and without creating air bubbles. Cover it with a transparent finishing agent to protect and further polish the surface. Finally, allow it to dry and cure completely following the recommended drying times. Remember to work in a well-ventilated environment and wear the necessary personal protective equipment.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85