How to Achieve a Smooth Finish with Naturesin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

How to Achieve a Smooth Finish with Naturesin

To obtain a smooth surface with Naturesin resin, it is essential to carefully follow a few steps. First, prepare the surface by removing dirt, grease, and impurities. Apply a specific primer for custom resins and let it dry completely. Then, pour the Naturesin resin onto the surface and level it with a notched trowel. Use a roller to remove any air bubbles and let it dry completely. Finally, for an even smoother finish, you can sand it with fine-grit sandpaper. By following these steps accurately, you will achieve a smooth and uniform surface with Naturesin resin.

Flat Surface Techniques with Naturesin

The techniques for preparing a flat surface with Naturesin material involve several key steps:

1. Cleaning: remove any dirt, grease, or dust residues from the surface.
2. Sanding: use fine sandpaper to sand the surface evenly.
3. Primer application: apply a specific primer for Naturesin to enhance material adhesion.
4. Naturesin application: spread the material on the surface using a brush or roller evenly, without leaving lumps.
5. Leveling: use a spatula to level the Naturesin to ensure a smooth and even surface.
6. Drying: allow the Naturesin to dry for the manufacturer's recommended time. By following these techniques carefully, you will achieve a flat and uniform surface with Naturesin material.

How to effectively polish Naturesin

To effectively polish Naturesin, it is advisable to follow these steps:

1. Surface preparation: Make sure that the Naturesin is clean and free from dirt or residues.
2. Coarse sanding: Use coarse-grit sandpaper to remove any irregularities or imperfections.
3. Fine sanding: Switch to finer-grit sandpaper to achieve a smooth and uniform surface.
4. Use of polishing resins: Apply specific polishing resins for Naturesin to enhance the finish and shine of the surface.
5. Finishing: Lastly, use specific products such as silicones or protective coatings to preserve the beauty and longevity of the polished Naturesin. By carefully following these steps, you will achieve an effective polishing result on Naturesin.

Tips for a smooth finish with Naturesin

To achieve a smooth finish with Naturesin, it is important to follow some useful tips:

1. Surface preparation: Ensure that the surface is clean, dry, and free from grease, dust, or other impurities.
2. Uniform application: Use a brush or a roller to spread the Naturesin evenly on the surface. Avoid excess product that could cause irregularities.
3. Leveling: After application, use a short nap roller to level the Naturesin and achieve a smoother finish.
4. Drying: Respect the drying times recommended by the manufacturer before applying any subsequent layers. By carefully following these tips, you can achieve a smooth and uniform finish with Naturesin on your surfaces.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85