How to make epoxy resin smooth

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

How to make epoxy resin smooth

To make epoxy resin smooth, it is important to follow some fundamental steps:

1. Sanding: Use fine-grit sandpaper to sand the surface of the resin evenly.
2. Polishing: After sanding, proceed with polishing using a specific polishing compound for resins.
3. Use a polisher: For optimal results, you can use a polisher and a polishing pad.
4. Cleaning: Finally, make sure to thoroughly clean the surface to remove any dust or polishing compound residues. By carefully following these steps, you can achieve a smooth and glossy surface on your resin.

How to achieve a smooth surface with epoxy resin

To obtain a smooth surface with epoxy resin, follow these steps:

1. Prepare the surface: Make sure it is clean, dry, and free from dust and grease.
2. Mix the resin: Carefully follow the manufacturer's instructions to mix the resin and hardener in the correct ratio.
3. Apply the resin: Pour the resin onto the prepared surface and spread it evenly with a brush or spatula.
4. Level the resin: Use a brush or roller to remove any air bubbles and level the resin on the surface.
5. Let it dry: Respect the drying times recommended by the manufacturer to achieve a smooth and uniform surface. By carefully following these steps, you can achieve a smooth and glossy surface with epoxy resin.

How to Sand Epoxy Resin

To sand epoxy resin, it is advisable to follow these steps:

1. Start with a coarse grit sandpaper (80-120) to remove any irregularities or excess resin.
2. Move on to a medium grit (180-220) for a gentler sanding to even out the surface.
3. Proceed with a fine grit (320-400) to make the surface smooth to the touch.
4. Finally, use a very fine sandpaper (600-1200) to achieve a smooth and glossy finish. Remember to work with circular or longitudinal motions to avoid scratches and to maintain consistent pressure during sanding. Afterwards, you can polish the resin with specific products for an impeccable result.

Techniques for achieving a glossy resin finish

To achieve a glossy resin finish, you can follow some specific techniques:

• Ensure that the surface on which the resin will be applied is clean and free from dust and grease.
• Use high-quality transparent epoxy resins to obtain a long-lasting glossy effect.
• Thoroughly mix the resin with the hardener following the proportions recommended by the manufacturer.
• Apply the resin evenly on the desired surface, avoiding air bubbles.
• Use a gas torch to remove any air bubbles present.
• Cover the resin with a specific polishing agent or with a layer of glossy transparent paint for an even shinier effect. By carefully following these techniques, it is possible to achieve a flawless and glossy resin surface.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85