How to Prevent Bubbles in Thin Decorative Castings

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

How to Prevent Bubbles in Thin Decorative Castings

To prevent bubbles in thin decorative castings, it is important to follow some precautions:

1. Make sure to work in a well-ventilated environment free from air drafts.
2. Thoroughly mix the epoxy resin or silicone following the manufacturer's instructions to avoid air entrapment during the process.
3. Use a clean container free from moisture residues for the mixing process.
4. Pour the resin or silicone slowly and evenly, avoiding sudden movements that could introduce bubbles.
5. If necessary, use a tool to eliminate surface bubbles, such as a blowtorch or a flame brush, taking care not to overheat the material. By following these tips, it will be possible to achieve thin decorative castings free from air bubbles.

**Epoxy Resin Bubble Techniques**

Techniques for creating bubbles in epoxy resin are used for artistic and decorative purposes. To achieve this effect, different methodologies can be adopted:

1. Torch Method: By heating the surface of the resin with a torch, trapped bubbles inside can be released.
2. Slow Stirring: Gentle stirring of the resin can reduce the formation of air bubbles during mixing.
3. Atmospheric Pressure: Using a vacuum chamber or vacuum press can eliminate air bubbles present in the resin.
4. Heating: Slightly heating the resin can help reduce viscosity and facilitate the release of bubbles. By following these techniques, it is possible to achieve smooth surfaces free of imperfections when working with epoxy resin.

Epoxy resin casting bubbles tips

Bubbles in resin casting can be avoided by following some useful tips:

• Make sure to work in a clean, dust-free environment to avoid contaminations.
• Thoroughly mix the resin and the hardener according to the proportions recommended by the manufacturer.
• Pour the resin slowly and evenly to prevent air from entering.
• Use a torch to eliminate larger bubbles present in the resin itself.
• For smaller bubbles, you can use a brush or a toothpick to bring them to the surface and then remove them. By following these tips, you can achieve bubble-free resin castings with a flawless final result.

How to Remove Epoxy Resin Bubbles

Bubbles in epoxy resin can be caused by various reasons, but fortunately, they can be eliminated by following some steps. Here's what you can do:

• Use a gas torch to eliminate larger bubbles by gently heating the surface of the resin.
• Use a brush to evenly spread the resin on the support, avoiding the formation of air bubbles.
• Use a resin mixer to thoroughly blend the material before application.
• Reduce the mixing speed to prevent air from entering the resin.
• Use a heat gun to remove smaller bubbles on the surface. By following these tips, you should be able to effectively remove bubbles in the resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85