How to Remove Microbubbles on Flat Surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

How to Remove Microbubbles on Flat Surfaces

Microbubbles on flat surfaces can be eliminated by following these steps:

• Use a spatula or a rubber spatula to spread the coating evenly on the surface.
• Use a short nap roller to apply the material evenly.
• Use a vacuum roller to remove any existing microbubbles.
• Allow the coating to dry completely.
• If microbubbles persist, gently use a spatula to remove them and then repeat the application and leveling process. By carefully following these steps, it will be possible to effectively eliminate the microbubbles from the flat surface.

How to avoid bubbles in epoxy resin

To prevent the formation of bubbles in epoxy resin during the processing, it is essential to follow some precautions:

1. Make sure to work in a well-ventilated environment to promote the release of trapped air.
2. Thoroughly mix the epoxy resin with the hardener according to the manufacturer's instructions, avoiding the incorporation of too much air.
3. Use a torch to eliminate any surface bubbles by quickly passing it over the surface.
4. Pour the epoxy resin slowly and evenly to avoid bubble formation.
5. Use a thin brush to spread the resin on corners and vertical surfaces. By following these tips, you can achieve bubble-free epoxy resin works.

Tips for Removing Bubbles in Clear Epoxy Resin

To eliminate bubbles in clear epoxy resin, it is important to follow some useful tips. Here's what you can do:

• Use high-quality clear epoxy resin designed to reduce bubble formation.
• Mix the resin slowly and thoroughly to avoid air entrapment.
• Use a torch to remove larger surface bubbles.
• Allow the resin to rest for a few minutes before pouring it into the desired mold.
• Use a warm brush to eliminate smaller bubbles that may form.
• Avoid blowing on the resin as this may introduce additional air bubbles.
• If necessary, use a vacuum chamber to remove bubbles trapped in the resin. By following these simple tips, you can achieve a bubble-free, transparent surface in your artistic creation.

Solutions for bubbles in DIY resin

Bubbles in DIY resin can be a common issue, but there are several strategies to prevent or solve them. Here are some helpful solutions:

• Use a resin suitable for DIY projects and mix it carefully following the manufacturer's instructions.
• Remove air bubbles with a gas torch or a vacuum deaerator before the curing process.
• Use a brush to evenly spread the resin, avoiding excessive stirring of the mixture.
• Let the mixture rest for a few minutes before pouring it into the mold, allowing the bubbles to rise to the surface and be eliminated.
• If bubbles appear during the curing process, they can be removed with a brush soaked in denatured alcohol.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85