Manual Anti-Air Technique for Resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Manual Anti-Air Technique for Resin

The manual anti-air technique for resin is a process used to eliminate air bubbles that may form during the processing of epoxy or polyurethane resins. To prevent the bubbles from compromising the quality of the finished work, it is important to follow some steps:

1. Thoroughly mix the epoxy or polyurethane resin with the hardener following the proportions recommended by the manufacturer.
2. Use a stick or a toothpick to slowly and evenly stir, avoiding introducing air into the mixture.
3. Apply the resin to the surface evenly and without creating sudden movements that may incorporate air.
4. Use a deaerator or a spray gun to eliminate any air bubbles present on the surface of the resin. By carefully following these steps, it is possible to achieve a final result free from unwanted air bubbles.

**Air Bubble Technique for Epoxy Resin**

Air bubbles in resin are a common issue during processing. To prevent the formation of air bubbles in the resin, follow these tips:

• Make sure to mix the resin slowly to avoid air from getting trapped.
• Use an environment with a constant temperature to reduce the resin's viscosity.
• Eliminate air bubbles with a gas torch or a specific device.
• Subject the resin to vacuum to remove any trapped bubbles.
• Avoid over-agitating the resin to prevent air introduction. By carefully following these techniques, you can achieve better results in resin processing and prevent the formation of air bubbles.

Silicone and Resin Printing Techniques

Silicone and resin printing techniques are used to create customized and detailed objects. Silicone printing allows for reproducing fine details and flexibility, ideal for creating molds for jewelry or artistic objects. On the other hand, resin offers strength and transparency, perfect for creating home decor or bijoux. Printing techniques involve the use of silicone molds to create precise and detailed shapes, which are then filled with resin. This process requires attention to measurement and drying time to achieve optimal results. Both silicone and resin offer endless creative possibilities in the DIY and crafting industry.

DIY Pigmented Resin

DIY pigmented resins are products used to create colored coatings on various surfaces. These resins, often based on epoxy or polyurethane resin, are mixed with colored pigments to achieve the desired color. Thanks to their versatility, DIY pigmented resins are widely used in coating and decoration projects, such as floors, furniture, or decorative objects. It is essential to carefully follow the mixing and application instructions to ensure optimal results. With the right preparation and attention to detail, it is possible to achieve durable and customized finishes with DIY pigmented resins.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85