Method for Casting Ultra Smooth Resin

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Method for Casting Ultra Smooth Resin

To achieve a casting of ultra smooth resin, it is essential to follow a precise processing method. Here are the steps to follow:

1. Preparation: Ensure that the surface on which you will pour the resin is clean, dry, and leveled.
2. Measurement: Precisely measure the resin and the catalyst following the manufacturer's instructions to avoid errors in polymerization.
3. Mixing: Thoroughly mix the resin and the catalyst for at least 2-3 minutes, being careful not to introduce air bubbles.
4. Pouring: Slowly pour the resin onto the prepared surface, avoiding sudden movements that could create imperfections.
5. Leveling: Use a spatula or a brush to evenly distribute the resin on the surface and level it.
6. Drying: Let the resin dry in a dust-free and dry environment, following the recommended curing times. By carefully following these steps, you can achieve a casting of ultra smooth resin without defects.

How to achieve smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, it is essential to follow some key steps:

1. Surface preparation: Make sure the surface is clean, dry, and free of dust or grease.
2. Thoroughly mix the epoxy resin with the hardener according to the proportions recommended by the manufacturer.
3. Apply the mixture evenly on the surface with a brush or a spatula, avoiding excess.
4. Eliminate air bubbles with a gas torch or a hot brush.
5. Allow it to dry and cure completely according to the indicated drying times.
6. If necessary, proceed to the sanding phase with fine sandpaper to obtain a smooth and uniform surface.

Techniques for achieving perfectly smooth resin casts

To achieve perfectly smooth resin casts, it is essential to follow some specific techniques:

1. Cleaning and preparing the working surface to avoid impurities.
2. Using high-quality epoxy resins with low viscosity for better flow.
3. Thoroughly mixing the resin with the catalyst following the recommended proportions.
4. Removing air bubbles with a gas torch or a vacuum stirrer.
5. Leveling the resin with a spatula to obtain a uniform surface.
6. Covering the project during the curing process to prevent dust and debris. By following these techniques, it is possible to obtain smooth resin casts free of defects.

Tips for achieving an ultra-smooth finish with epoxy resin

To achieve an ultra-smooth finish with epoxy resin, follow these tips:

• Make sure to work in a clean and well-ventilated environment.
• Measure the resin and hardener accurately to avoid curing issues.
• Thoroughly mix the two components for at least 2-3 minutes.
• Apply a thin layer of resin with a brush or a spatula.
• Remove air bubbles using a gas torch or a warm brush.
• Cover the work to prevent dust during curing.
• After complete curing, sand the surface with fine sandpaper and polish it with a specific polish for epoxy resins. By following these steps, you will achieve an ultra-smooth and glossy finish with epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85