Vibrating platform for removing air bubbles

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Vibrating platform for removing air bubbles

A vibrating platform is a device designed to effectively remove air bubbles present in liquid or fluid materials during mixing or preparation processes of coatings. This technology harnesses high-frequency vibrations to agitate the liquid in order to bring out and disperse the air bubbles within it. Thanks to the vibrating action, the air bubbles are gradually eliminated, ensuring a final product free from defects and with a greater uniformity in material distribution. The use of a vibrating platform is particularly advantageous in industrial settings, but it can also be employed on a DIY level in the coatings sector to enhance the quality of self-produced coatings.

How to Remove Air Bubbles from Epoxy Resin

To remove air bubbles from epoxy resin, follow these steps:

1. Mix the epoxy resin slowly to prevent the introduction of air.
2. Use a heat gun or a gas torch to gently heat the resin, causing the bubbles to emerge.
3. Use a vacuum chamber to vacuum out the air bubbles from the resin.
4. Use a compressed air gun to gently blow on the surfaces to bring the bubbles to the surface.
5. Let the resin rest for a few minutes so that the air bubbles rise to the surface and can be removed with a stick or a needle. By following these tips, you can achieve a final result free of air bubbles in your epoxy resin.

Improving the finish of resin artifacts

To improve the finish of resin artifacts, it is advisable to follow these steps:

• Carefully sand the surface to remove any imperfections and achieve a smooth base.
• Apply a specific resin primer to promote adhesion of the subsequent finishing layer.
• Use a transparent or colored resin to create a uniform and glossy coating.
• Consider applying a protective layer of silicone to ensure greater resistance and durability over time.
• Always follow the manufacturer's instructions and, if necessary, carry out tests on a sample before proceeding with the final artifact.

Techniques for achieving smooth surfaces with epoxy resin

To achieve smooth surfaces with epoxy resin, it is essential to follow specific techniques. Here are some useful tips:

• Make sure to prepare the surface thoroughly before applying the resin, by eliminating any imperfections and cleaning it thoroughly.
• Use a primer compatible with epoxy resin to ensure optimal adhesion.
• Apply the resin in thin and uniform layers, avoiding build-ups and air bubbles.
• Use a brush or a roller to spread the resin evenly.
• After application, eliminate any air bubbles with a gas torch or a fine bristle brush. By following these techniques, you can achieve smooth and high-quality surfaces with epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85