Adhesion on galvanized metals

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Adhesion on galvanized metals

Adhesion on galvanized metals is a critical process to ensure the durability and effectiveness of coatings. Since galvanized metal is known for its particularly smooth surface and corrosion resistance, it is essential to properly prepare the substrate to promote excellent adhesion. It is advisable to carry out a thorough cleaning of the galvanized surface to remove any residues of oils, greases, or oxides that could compromise adhesion. Subsequently, the use of epoxy or polyurethane primers specific for galvanized metals can further enhance the compatibility and adhesion of the final coating. Careful substrate preparation is essential to ensure optimal long-term performance.

Epoxy resin adhesion on galvanized metals

Adhesion of epoxy resin on galvanized metals can present challenges due to the zinc surface, which may be prone to oxidation and the presence of oils or greases. To ensure good adhesion, it is essential to properly prepare the substrate through a cleaning and sandblasting process to remove any contaminants. Additionally, using specific primers for galvanized metals can enhance the adhesion of the epoxy resin, creating a strong and durable bond over time. Make sure to carefully follow the manufacturer's instructions for the epoxy resin and primer to achieve the best results in terms of adhesion and coating longevity.

Surface preparation for galvanized metals

Surface preparation of galvanized metals is crucial to ensure good adhesion of coatings. Here are the steps to follow to achieve optimal results:

1. Cleaning: remove dirt, grease, and zinc residues using solvents or degreasing detergents.
2. Degreasing: use specific solvents to eliminate any traces of grease.
3. Sandblasting: treat the surface with sandblasting to create roughness and improve adhesion.
4. Passivation: apply a rust converter to protect the metal from further oxidations.
5. Primer application: apply a specific primer for galvanized metals to enhance the adhesion of the subsequent coating. By following these steps, you will obtain a galvanized metal surface ready to be effectively and durably coated.

Galvanized metal adhesive

Galvanized metal adhesive is a type of glue specifically designed to bond materials treated with zinc coating. These special resins are high-performance adhesive formulations capable of ensuring strong adhesion on galvanized surfaces, creating resistant and durable joints. Galvanized metal adhesives are particularly useful in industrial and DIY applications where it is necessary to bond galvanized metal parts without compromising the strength and integrity of the joint. It is important to carefully follow the manufacturer's instructions to achieve the best adhesion results on zinc-coated materials.

Epoxy resin adhesion on zinc

The adhesion of epoxy resin on zinc depends on the correct preparation of the surface before application. It is essential to remove any traces of grease, dirt, or oxide from the zinc surface to ensure optimal adhesion of the epoxy resin. Moreover, it is advisable to apply a specific primer for metals before spreading the epoxy resin. This helps improve adhesion and the durability of the coating on the galvanized surface. Make sure to carefully follow the manufacturer's instructions for both surface preparation and epoxy resin application to ensure maximum resistance and long-term durability.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85