Fibrous waterproofing for ceramic surfaces

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Fibrous waterproofing for ceramic surfaces

Fibrous waterproofing for ceramic surfaces are specific products designed to protect and waterproof tiles and ceramic surfaces. These products contain fibers that help reinforce the waterproof coating, increasing its resistance and durability over time. Applying a fibrous waterproofing on ceramic surfaces helps prevent water infiltration, stains, and moisture damage, extending the life of the tiles and facilitating their cleaning. It is important to carefully follow the manufacturer's instructions for a correct and effective application of the fibrous waterproofing on ceramic surfaces.

How to Apply Textured Waterproof Coating

Applying textured waterproof coating is a fairly simple process that requires some attention to detail. Here is how to proceed:

1. Surface Preparation: Ensure that the surface is clean, dry, and free from dust, dirt, or previous residues. If needed, lightly sand the surface.
2. Application of the Waterproof Coating: Use a brush or a short nap roller to evenly spread the textured waterproof coating on the surface. Make sure to follow the manufacturer's instructions regarding the number of coats to apply.
3. Drying and Setting Time: Allow the product to dry completely between coats. Respect the setting times indicated on the packaging.
4. Inspection and Finishing: Check that the entire surface is evenly covered and make sure to correct any imperfections before the waterproof coating dries completely. By carefully following these steps, you can ensure a proper application of the textured waterproof coating.

Best brands of waterproofing products for ceramic surfaces

Waterproofing products for ceramic surfaces are specific products designed to protect and seal tiles from moisture, dirt, and stains. Among the best brands available on the market, we can mention:

• Mapei: offers professional solutions for waterproofing tiles and ceramic surfaces.
• Kerakoll: provides innovative and environmentally friendly products for the protection of ceramic surfaces.
• Fila: with a wide range of high-quality waterproofing products, it ensures long-lasting and reliable results.
• LTP: specialized in treatments for the protection and maintenance of surfaces, including products for ceramics. Choosing one of the aforementioned brands will ensure effective protection and long-lasting durability for your ceramic surfaces.

Waterproofing ceramic surfaces tutorial

Waterproofing ceramic surfaces is a fundamental operation to ensure the durability and resistance over time of floors and coatings. Here's how to proceed:

1. Cleaning: Make sure the surface is clean and free of dirt and residues.
2. Product selection: Use a specific waterproofing resin for ceramics.
3. Application: Spread the product evenly with a brush or roller, following the manufacturer's instructions.
4. Drying: Allow to dry completely before exposing the surface to moisture.
5. Maintenance: Repeat the operation periodically to ensure long-lasting protection.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85